Hafele Pocket Door System, Accuride 1432 (Hinges not Included)
- SKU: HA-408.24.541
- Brand: Hafele
$134.30 – $191.41
Vertical use as pivot sliding door fitting and horizontal use as pivot sliding door runner
refund
On orders over $99
- For swivelling up and sliding in flaps, e.g. in media furniture
- No obstruction caused by open flap or open hinged door
- Excellent running properties provided by synchronised runners
- For doors 13/16” or thicker, please order the optional 40 mm hinge kit
- For doors 36” – 78” tall, see below for additional hinges required
- Set: Set with tracks
- Number of doors: 1
- For door width: 915 – 2,000 mm
- For door height: 255 – 660 mm
- For door weight: ≤34 kg
- Version: Hinge carrier strip set can be shortened for use with narrower flaps with cable system for synchronised running of left and right runners
- Load bearing capacity: 75 lbs.
- For door thickness min.: 3/4″ for doors 13/16″ or thicker, please order the optional 40 mm hinge kit
- For door thickness max.: 1 1/4″ for doors 13/16″ or thicker, please order the optional 40 mm hinge kit
- For door width (inches): Up to 26″
- For door height (inches): Up to 78″ (for doors 36 – 78″ tall), addtional hinges required
- Area of application: For pivot sliding doors (vertical installation), for flaps (horizontal installation)
- For door material: wood
- For door thickness: 19 – 32 mm
- Material/finish: Steel, Black, Zinc plated
- Installation: Vertically mounted concealed doors
- Supplied with: Slide mounting hardware kit, Mounting instructions
Slide length | Slide travel | 1432 ? hinges not included |
---|---|---|
12″ (305mm) | 8-1/4″ (210mm) | 408.24.530 |
14″ (356mm) | 10-1/4″ (261mm) | 408.24.535 |
16″ (405mm) | 12-1/2″ (312mm) | 408.24.541 |
18″ (456mm) | 13-1/2″ (343mm) | 408.24.546 |
20″ (506mm) | 15-1/2″ (394mm) | 408.24.551 |
22″ (557mm) | 17-1/2″ (445mm) | 408.24.556 |
24″ (608mm) | 19-1/2″ (496mm) | 408.24.561 |
26″ (659mm) | 21-1/2″ (546mm) | 408.24.566 |
28″ (710mm) | 23-1/2″ (597mm) | 408.24.571 |
30″ (762mm) | 25-1/2″ (648mm) | 408.24.576 |
32″ (813mm) | 27-1/2″ (699mm) | 408.24.581 |
Required products:
The flap must not be subjected to loads in the open, not pushed-in position. It must be continuously guided and pushed-in by hand during the entire opening procedure.
Weight | 2.34 lbs |
---|---|
Dimensions | 15.74 × 3.93 × 1.57 in |
Slide Length | 305mm (12''), 356mm (14''), 405mm (16''), 456mm (18''), 506mm (20''), 557mm (22''), 608mm (24''), 659mm (26''), 710mm (28''), 762mm (30''), 813mm (32'') |
Brand |
Only logged in customers who have purchased this product may leave a review.
Download PDF
Download PDF
Suggested products
-
Remove from Wishlist
SKU:HA-408.24.062
Hafele Connector Clip Kit, for Accuride 1332/1432 Pivot Pocket Door
$3.58Add to cartUse 1 Connector Clip at each joint of carrier strip and 1 for every hinge mounted on the carrier strip. They are not required for the hinge mounted directly to the slide. For 2 doors 59” to 71” order 1 Connector Clip Kit. For 2 doors 71” to 78” order 3 Connector Clip Kits. Area …
Hafele Connector Clip Kit, for Accuride 1332/1432 Pivot Pocket DoorRead More
-
Remove from Wishlist
Hafele Hinge Carrier Strip Kit, for Accuride 1332/1432 Pivot Pocket Door
$37.62Select options This product has multiple variants. The options may be chosen on the product pageRequired for all doors 36” – 78” tall Order 2 Hinge Carrier Strip Kits per 2 doors for heights of 36” to 56”, and 3 kits for doors 57” to 78” Area of application: For wooden flaps Supplied with: 2 Hinge carrier strips 3 Connector clips Mounting screws
-
Remove from Wishlist
Hafele 35 mm (1 3/8″) Hinge Kit, for Accuride 1332/1432 Pivot Pocket Door
$50.71 – $54.96Select options This product has multiple variants. The options may be chosen on the product pageArea of application: For wooden flaps Supplied with: 2 Hinges 2 Mounting plates 2 Spacers 4 Wood screws
Related products
-
Remove from Wishlist
SKU:HA-361.49.603
Hafele Clarior Glass Door Cabinet Hinge 40mm (1-5/8”) Wide, 95° Opening Angle
$16.79Add to cartHafele Clarior 95° Glass Door Hinge Material: Die-Cast Zinc Finish: Nickel Plated Matt Maximum Door Opening Angle: 95° For Lightweight Inset Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted Reversible: Can be Used Left or Right For Glass Thicknesses 6mm (1/4”) Maximum Door Weight: 4kg (8.8 lbs.) Maximum Door Size: …
Hafele Clarior Glass Door Cabinet Hinge 40mm (1-5/8”) Wide, 95° Opening AngleRead More
-
Remove from Wishlist
SKU:HA-361.46.041
Hafele Overlay Glass Door Cabinet Hinge 51mm (2”) Height, Corrosion Resistant
$36.33Add to cartFeatures: Hafele Overlay Glass Door Hinge For Use in Applications where Resistance to Corrosion is Needed Material: 304 Grade Stainless Steel, Cover: Zinc Finish: Chrome Plated For Mid-Size Glass Doors Sold Per Piece Requires Two 10mm (3/8”) Drill Holes in Glass Screw-Mounted For Half Overlay Doors For Glass Thicknesses 5mm (13/16”) – 8mm (3/8”) Maximum …
Hafele Overlay Glass Door Cabinet Hinge 51mm (2”) Height, Corrosion ResistantRead More
-
Remove from Wishlist
SKU:HA-421.46.958
Hafele Top/Bottom Mount Full Extension Slide, 275 lbs, 22-5/8″ with Soft Close
$360.00Add to cartFeatures: Top/Bottom Mounted Pantry Pullout Slide Set Rated to Support 275 lbs Maximum Pullout Size: 18″W x 72″H 22-5/8″ Extension Horizontal and Vertical Adjustment Soft Close Mechanism with Rear Stop No Deflection in Fully Extended Position Vertical Clearance: 5-7/16″ Description: Hafele’s Full Extension Top/Bottom Mounted Pantry Pullout is designed to support the most ambitious of …
Hafele Top/Bottom Mount Full Extension Slide, 275 lbs, 22-5/8″ with Soft CloseRead More
-
Remove from Wishlist
SKU:HA-373.58.919
Hafele Firmatop Cabinet Lid Stay, 250mm (9-13/16″) Length
$20.57Add to cartFeatures: Hafele Firmatop Cabinet Lid Stay With internal spring Dual-purpose integrated spring holds lid securely in open or closed position Can use one or two stays, depending on lid weight Reversible, can be installed left or right Chrome-Plated finish Made of Brass Description: This Hafele Firmatop Cabinet Lid Stay features a dual-purpose integrated spring, which …
Hafele Firmatop Cabinet Lid Stay, 250mm (9-13/16″) LengthRead More
-
Remove from Wishlist
SKU:HA-342.66.709
Hafele 3-Way Adjustable and Detachable Flap Hinge 35mm (1-3/8”) Diameter with 90° Opening Angle
$17.27Add to cartHafele 90° Flap Hinge Material: Die-Cast Zinc Finish: Nickel Plated Maximum Door Opening Angle: 90° Flushed Mounted Application Three-way Adjustable and Detachable Two Cups can be released and detached for added convenience Screws Included 35mm (1-3/8”) Diameter
-
Remove from Wishlist
SKU:HA-325.02.702
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening Angle
$23.96Add to cartFeatures: Hafele 90° Miter Flap Hinge Ideal for Doors and Flaps Material: Cup: Die-Cast Zinc/Hinge Arm: Steel Finish: Nickel Plated Maximum Door Opening Angle: 90° Three-way Adjustable: 3mm (1/8”) H, 1.5mm (1/20”) in Depth and Width Screw-Mounted Chamfer: 45° Door Thickness: 16mm (5/8”) to 22mm (3/4”) Side Panel Thickness: 16mm (5/8”) to 22mm (3/4”) Use …
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening AngleRead More
- Remove from Wishlist
-
Remove from Wishlist
SKU:HA-372.91.479
Hafele Housing, Screw-mounted, Grey, similar to RAL 7035
$2.06Add to cartFeatures: Material: Plastic Finish/color: Grey, similar to RAL 7035 Material: Plastic Color: Grey, similar to RAL 7035 Dimensions: (W = side to side) (D = front to back) (H = top to bottom)
-
Remove from Wishlist
SKU:HA-343.91.600
Hafele Aximat® Institutional Heavy Duty Folding Door Cabinet Hinge with 180° Opening Angle
$15.33Read moreHafele Aximat® Institutional 180° Folding Door Hinge For Free-Swinging or Guided Folding Doors Material: Zinc Finish: Nickel Maximum Door Opening Angle: 180° Maximum Door Width: 600mm (23-5/8”) for Both Doors Minimum Door Thickness of 13mm (1/2”) Same Drilling Pattern for Both Leaves Gap Range: Adjustable from 0 ? 10mm (3/8”) Factory Supplied with Pre-Set …
Hafele Aximat® Institutional Heavy Duty Folding Door Cabinet Hinge with 180° Opening AngleRead More
-
Remove from Wishlist
SKU:HA-361.50.820
Hafele HA-361.50.820 Desk or Flap Pivot Furniture Hinge with 90° Opening Angle (Sold as Pair)
$82.03Add to cartFeatures: Hafele 90° Desk Pivot Hinge For Flap Ideal for Dropleaf Furniture Material: Brass Finish: Polished Brass Maximum Door Opening Angle: 90° Mounts on Drop Leaves Screw-Mounted With Stop Sold as Pair Description: The 90° Desk Pivot Cabinet Hinge by Hafele mounts on drop leaves, screw-mounted, with stop, measures 150mm (5-7/8”) in width and available …
Reviews
There are no reviews yet.