1/2" Copper Cap... 
- For swivelling up and sliding in flaps, e.g. in media furniture
- No obstruction caused by open flap or open hinged door
- Excellent running properties provided by synchronised runners
- For doors 13/16” or thicker, please order the optional 40 mm hinge kit
- For doors 36” – 78” tall, see below for additional hinges required
- Set: Set with tracks
- Number of doors: 1
- For door width: 915 – 2,000 mm
- For door height: 255 – 660 mm
- For door weight: ≤34 kg
- Version: Hinge carrier strip set can be shortened for use with narrower flaps with cable system for synchronised running of left and right runners
- Load bearing capacity: 75 lbs.
- For door thickness min.: 3/4″ for doors 13/16″ or thicker, please order the optional 40 mm hinge kit
- For door thickness max.: 1 1/4″ for doors 13/16″ or thicker, please order the optional 40 mm hinge kit
- For door width (inches): Up to 26″
- For door height (inches): Up to 78″ (for doors 36 – 78″ tall), addtional hinges required
- Area of application: For pivot sliding doors (vertical installation), for flaps (horizontal installation)
- For door material: wood
- For door thickness: 19 – 32 mm
- Material/finish: Steel, Black, Zinc plated
- Installation: Vertically mounted concealed doors
- Supplied with: Slide mounting hardware kit, Mounting instructions
| Slide length | Slide travel | 1432 ? hinges not included |
|---|---|---|
| 12″ (305mm) | 8-1/4″ (210mm) | 408.24.530 |
| 14″ (356mm) | 10-1/4″ (261mm) | 408.24.535 |
| 16″ (405mm) | 12-1/2″ (312mm) | 408.24.541 |
| 18″ (456mm) | 13-1/2″ (343mm) | 408.24.546 |
| 20″ (506mm) | 15-1/2″ (394mm) | 408.24.551 |
| 22″ (557mm) | 17-1/2″ (445mm) | 408.24.556 |
| 24″ (608mm) | 19-1/2″ (496mm) | 408.24.561 |
| 26″ (659mm) | 21-1/2″ (546mm) | 408.24.566 |
| 28″ (710mm) | 23-1/2″ (597mm) | 408.24.571 |
| 30″ (762mm) | 25-1/2″ (648mm) | 408.24.576 |
| 32″ (813mm) | 27-1/2″ (699mm) | 408.24.581 |
Required products:
The flap must not be subjected to loads in the open, not pushed-in position. It must be continuously guided and pushed-in by hand during the entire opening procedure.
Suggested products
-
Remove from Wishlist
Hafele Hinge Carrier Strip Kit, for Accuride 1332/1432 Pivot Pocket Door
$37.62Select options This product has multiple variants. The options may be chosen on the product pageRequired for all doors 36” – 78” tall Order 2 Hinge Carrier Strip Kits per 2 doors for heights of 36” to 56”, and 3 kits for doors 57” to 78” Area of application: For wooden flaps Supplied with: 2 Hinge carrier strips 3 Connector clips Mounting screws
-
Remove from Wishlist
SKU:HA-408.24.062
Hafele Connector Clip Kit, for Accuride 1332/1432 Pivot Pocket Door
$3.58Add to cartUse 1 Connector Clip at each joint of carrier strip and 1 for every hinge mounted on the carrier strip. They are not required for the hinge mounted directly to the slide. For 2 doors 59” to 71” order 1 Connector Clip Kit. For 2 doors 71” to 78” order 3 Connector Clip Kits. Area …
Hafele Connector Clip Kit, for Accuride 1332/1432 Pivot Pocket DoorRead More
-
Remove from Wishlist
Hafele 35 mm (1 3/8″) Hinge Kit, for Accuride 1332/1432 Pivot Pocket Door
$50.71 – $54.96Select options This product has multiple variants. The options may be chosen on the product pageArea of application: For wooden flaps Supplied with: 2 Hinges 2 Mounting plates 2 Spacers 4 Wood screws
Related products
- Remove from Wishlist
-
Remove from Wishlist
SKU:HA-361.46.010
Hafele HA-361.46.010 Inset Glass Door Cabinet Hinge for Lightweight Glass Door 38.5mm (1-1/2”) Height, 180° Opening Angle
$12.36Add to cartFeatures: Hafele 180° Inset Glass Door Hinge Material: 304 Grade Stainless Steel Finish: Stainless Steel Maximum Door Opening Angle: 180° For Lightweight Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted For Inset Doors For Glass Thicknesses 4mm (5/32”), 5mm (13/16” ) or 6mm (15/64”) Maximum Door Weight: 4kg (8.8 lbs.) …
-
Remove from Wishlist
SKU:HA-361.93.240
Hafele Non-Bore All Metal Glass Door Cabinet Hinge with 180° Opening Angle, Pair
$18.63Add to cartFeatures: Hafele 180° All Metal Inset Glass Door Hinge Econo Version of a Non-Bore Glass Door Hinge For Lightweight Glass Doors Material: Die-Cast Zinc Finish: Textured Chrome Plated Matt Maximum Door Opening Angle: 180° With Catch Screw-Mounts to Side of Cabinet Vertical Adjustment with Oblong Holes Maximum Door Weight: 4kg (8.8 lbs.) Per Pair of …
Hafele Non-Bore All Metal Glass Door Cabinet Hinge with 180° Opening Angle, PairRead More
-
Remove from Wishlist
SKU:HA-343.91.600
Hafele Aximat® Institutional Heavy Duty Folding Door Cabinet Hinge with 180° Opening Angle
$15.33Read moreHafele Aximat® Institutional 180° Folding Door Hinge For Free-Swinging or Guided Folding Doors Material: Zinc Finish: Nickel Maximum Door Opening Angle: 180° Maximum Door Width: 600mm (23-5/8”) for Both Doors Minimum Door Thickness of 13mm (1/2”) Same Drilling Pattern for Both Leaves Gap Range: Adjustable from 0 ? 10mm (3/8”) Factory Supplied with Pre-Set …
Hafele Aximat® Institutional Heavy Duty Folding Door Cabinet Hinge with 180° Opening AngleRead More
-
Remove from Wishlist
SKU:HA-362.01.500
Hafele Corner Pivot Hinge, Cranked, (Sold as Pair) 70mm (2-3/4”) Wide with 180° Opening Angle
$43.72Add to cartFeatures: Hafele 180° Corner Pivot Hinge, Cranked Material: Brass Finish: Matt Brass Maximum Door Opening Angle: 180° Screw-Mounted Without Stop With Outer Knuckle Sold as Pair Description: The 180° Corner Pivot Cabinet Hinge, Cranked by Hafele is screw-mounted, has an outer knuckle, without stop, measures 70mm (2-3/4”) in width and available in a Matt Brass …
-
Remove from Wishlist
SKU:HA-342.75.226
Hafele Flap Hinge, Plano Medial, Chrome plated white
$3.45Add to cartFeatures: No projecting parts on the cabinet or flap Mounting: Screw-mounted Material: Plastic/zinc alloy Color: White Dimensions: (W = side to side) (D = front to back) (H = top to bottom)
-
Remove from Wishlist
SKU:HA-325.02.702
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening Angle
$23.96Add to cartFeatures: Hafele 90° Miter Flap Hinge Ideal for Doors and Flaps Material: Cup: Die-Cast Zinc/Hinge Arm: Steel Finish: Nickel Plated Maximum Door Opening Angle: 90° Three-way Adjustable: 3mm (1/8”) H, 1.5mm (1/20”) in Depth and Width Screw-Mounted Chamfer: 45° Door Thickness: 16mm (5/8”) to 22mm (3/4”) Side Panel Thickness: 16mm (5/8”) to 22mm (3/4”) Use …
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening AngleRead More
-
Remove from Wishlist
SKU:HA-362.10.803
Hafele Corner Pivot Hinge, Straight, (Sold as Pair) 50mm (2”) Wide with 250° Opening Angle
$42.67Add to cartFeatures: Hafele 250° Corner Pivot Hinge, Straight Material: Brass Finish: Polished Brass Maximum Door Opening Angle: 250° Screw-Mounted Without Stop With Outer Knuckle Sold as Pair Description: The 250° Corner Pivot Hinge, Straight by Hafele is ideal for drop leaf furniture, screw-mounted application, without stop, with outer knuckle, measures 50mm (2”) in width and available …
Hafele Corner Pivot Hinge, Straight, (Sold as Pair) 50mm (2”) Wide with 250° Opening AngleRead More
-
Remove from Wishlist
SKU:HA-421.46.958
Hafele Top/Bottom Mount Full Extension Slide, 275 lbs, 22-5/8″ with Soft Close
$360.00Add to cartFeatures: Top/Bottom Mounted Pantry Pullout Slide Set Rated to Support 275 lbs Maximum Pullout Size: 18″W x 72″H 22-5/8″ Extension Horizontal and Vertical Adjustment Soft Close Mechanism with Rear Stop No Deflection in Fully Extended Position Vertical Clearance: 5-7/16″ Description: Hafele’s Full Extension Top/Bottom Mounted Pantry Pullout is designed to support the most ambitious of …
Hafele Top/Bottom Mount Full Extension Slide, 275 lbs, 22-5/8″ with Soft CloseRead More
-
Remove from Wishlist
SKU:HA-926.98.040
Hafele Startec Full Mortise Door Hinge for Flush Wooden or Metal Interior Doors
$18.71Add to cartFeatures: Hafele Startec Full Mortise Door Hinge Material: Stainless Steel Finishes: Matt For wooden or metal frames for flush wooden or metal interior doors Maximum Door Weight: 264 lbs. (120 kg) Bearing: With fixed pin and knuckle with two ball bearings Mounting: For DIN left hand and DIN right hand use Certified in compliance with …
Hafele Startec Full Mortise Door Hinge for Flush Wooden or Metal Interior DoorsRead More
Reviews
There are no reviews yet.