Brand: Blum
Blum
Showing 49–64 of 294 results
-
SKU:652950Blum Drawer Front Template
$8.53Read moreDescription Drawer front template for transferring the center point of the Blum 295100012 drawer front adjuster from the drawer front to the drawer box. For drawers using Tandem, Solo, or Standard runners. – 10 mm thick, 20 mm diameter. Product number 652950 Brand Blum Product Line MOVENTO, TANDEM, STANDARD Tooling Type Jig / Template
-
SKU:ZML1090Blum Drilling Template Distance Bumper
$364.29Read moreDescription For processing 993.0530 and 993.0830 distance bumpers, front Jig stops allow pre-drilling of holes for stops on faces, either alone or mounted. Machining is possible following the tracing or with integrated stop (fixed side 20 mm). Product number ZML1090 Brand Blum Product Line MOVENTO, TANDEM, LEGRABOX, TANDEMBOX Intivo, TANDEMBOX Antaro, TANDEMBOX Plus, AVENTOS, CLIP …
-
SKU:653300Blum Minifix Blum Jig
$36.83Read moreDescription Designed for type 230M (Standard) and 320M (Metabox) slides. For accurate positioning of screws and slides, this mounting tool is a must in terms of renovation. An optimal solution for a quick and easy installation of drawer boxes! Product number 653300 Brand Blum Product Line METABOX, STANDARD Tooling Type Accessory
-
SKU:60230112Blum Standard Left Rear Mounting Socket
$2.28Read moreDescription Left rear mounting socket for 230M in framed cabinets. Attach with #6 x 1/2" truss head screws. (Cannot be used with 430 full-extension series.) Product number 60230112 Brand Blum Product Line STANDARD Material Synthetic
-
SKU:60370012Blum Standard Right Rear Mounting Socket
$0.66Read moreDescription Right rear mounting socket for 230M in framed cabinets. Attach with #6 x 1/2" truss head screws. (Cannot be used with 430 full-extension series.) Product number 60230012 Brand Blum Product Line STANDARD Material Synthetic Finish Natural
-
SKU:60370112Blum Standard Left Rear Mounting Socket
$0.66Read moreDescription Left rear mounting socket for 230M drawer runners. Use with drawer runners for face-frame cabinets. Part depth of 70 mm, with a minimum of 19 mm of the cabinet profile to be mounted on the socket for stability. A minimum of 13 mm is required between the cabinet profile and side panel. Product number …
-
SKU:ZML0040Blum Universal Drilling Template
$122.92Read moreDescription Universal drilling template for marking or boring holes for front fixing brackets, drawer backs, and bottoms (Metabox C15). Works for both overlay and interior drawers. Suitable for the following drawers: Metabox 320/330 N,M,K,H and TandemBox 358 N,M. Includes template, ø 5 mm marking pin, ø 10 mm marking pin, ø 5 mm stop collar, …
Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.