Hafele Rear Pan... 
- (X) Shaft center = 10 mm (25/64″)
- (M) = Minimum bore depth: 20 mm (51/64″)
- Requires 5 mm hex bit
- Additional Zipbolts are available by request
Application: Zipbolt connectors are ideal for use in: countertops, staircase assembly, furniture construction, millwork joinery and more
Material: Steel
Housing: Zinc
Note : Set the cordless screwdriver on low speed torque, tightening torque max. 10 Nm.
Drilling pattern
Related products
-
Remove from Wishlist
Hafele Countersunk Connector, Confirmat, Pozi Drive, Size 2
$0.05Select options This product has multiple variants. The options may be chosen on the product pageLong shank, deep-cut thread ensures accurate, close-fitting joints between panels High pull-out resistance and strength at the corners Only a single drilling operation for side panels and shelves Consistently secure joints are assured even with repeated assembly and disassembly Drive: Pozi drive size 2 Material: steel Drill hole diameter: 4 mm Shaft diameter: 5 mm …
Hafele Countersunk Connector, Confirmat, Pozi Drive, Size 2Read More
-
Remove from Wishlist
SKU:HA-273.03.515
Hafele Double Fitting, for Beds with Central Tie-Bar
$1.54Add to cartInstallation: The supporting bracket is screwed to the tie-bar, the retaining plate to the head or foot Mounting: Screw-mounted Use #6 and #8 flathead screws Application: For beds with central tie-bar Material: Steel Finish: Galvanized Capable of separation The bed elements are securely held by the angled retaining flanges Supplied with 1 male part 1 …
Hafele Double Fitting, for Beds with Central Tie-BarRead More
-
Remove from Wishlist
Hafele Countersunk Connector, Confirmat, Hex Socket, 3 mm
$0.04 – $0.05Select options This product has multiple variants. The options may be chosen on the product pageLong shank, deep-cut thread ensures accurate, close-fitting joints between panels High pull-out resistance and strength at the corners Only a single drilling operation for side panels and shelves Consistently secure joints are assured even with repeated assembly and disassembly Drive: With hexagon socket, SW3 Material: steel Drill hole diameter: 4 mm Shaft diameter: 5 mm …
Hafele Countersunk Connector, Confirmat, Hex Socket, 3 mmRead More
-
Remove from Wishlist
Hafele JCN Nut, 1/4-20
$0.32 – $0.36Select options This product has multiple variants. The options may be chosen on the product pageModel series: JCN Drive: Hex M4 Head diameter: 17 mm Material: Steel
-
Remove from Wishlist
Hafele Keyhole Plate, Bed Connector
$0.95 – $1.03Select options This product has multiple variants. The options may be chosen on the product pageExtremely strong and invisible Dimensions of recesses should be taken directly from the fittings Use #6 flat head screw to install plate & Use #10 pan head screw for keyhole Components can be assembled or disassembled without tools Profiled plates for machined-recess installation Can also be inserted into a groove Features: Concealed hanger plates Installation: …
-
Remove from Wishlist
SKU:HA-260.13.721
Hafele Rear Panel Connector, for Screw Fixing to Rear Panel
$0.61Add to cartScrew mounted with Varianta 3mm or 5mm, or #6 countersunk. Screws sold separately. Material: Plastic Color: White
-
Remove from Wishlist
SKU:HA-260.12.706
Hafele Rear Panel Bracket, for 32 mm Series Holes
$1.43Add to cartColor: White Application: For 32 mm series holes Mounting: Press fit Hole diameter: 5 mm Material: Plastic Use #6 pan head screw
-
Remove from Wishlist
SKU:HA-273.41.550
Hafele Bed Connector, for Central-Tie Bar and Slatted Frame Supports
$3.19Add to cartFinish: Blue galvanized Application: For single and double beds as slatted frame/sofa frame or central tie-bar support Adjustment: Three-stage vertical adjustment, 4 attachment positions Installation: For screw fixing Height: 140 Material: Steel Use #8 flat head screw Installation reference When used on double beds with a 35 mm thick central tie-bar, the mounting plates must …
Hafele Bed Connector, for Central-Tie Bar and Slatted Frame SupportsRead More
-
Remove from Wishlist
Hafele Joint Connector Bolt, 1/4-20, Type JCB-C
$0.09 – $0.22Select options This product has multiple variants. The options may be chosen on the product pageProduct details: Version: Flat head Ø13 mm with M4 hexagon socket Material: Steel Type of head: Flat head Drive: TS/Hex/Socket Technical data Thread Ø M4 Head Ø 13 mm Head height 2 mm
-
Remove from Wishlist
SKU:HA-262.11.115
Hafele Rear Panel Connector, Häfele Ixconnect RPC D 5/24, for wooden drawers
$0.08Add to cartEasy assembly without tools Reduced drilling work One-piece Removable Application: For fixing the rear panel in wooden drawers with groove mounted rear panel For wood thickness: Drawer sides: (15/32 – 1/2″) 12–13 mm Rear panel thickness: From (3/8″) 10 mm For drill hole diameter: (3/16″) 5 mm Installation: For push fitting into (3/16″) 5 mm …
Hafele Rear Panel Connector, Häfele Ixconnect RPC D 5/24, for wooden drawersRead More
