- Fluted dowels allow the glue to distribute evenly over the entire surface
- Suitable for: Non-glued applications in combination with mechanical fasteners
- Application: Glued case connections
- Non-glued connections in combination with mechanical fastener
- Material: Kiln-dried hardwood
Related products
-
Remove from Wishlist
-
Remove from Wishlist
SKU:HA-273.03.515
Hafele Double Fitting, for Beds with Central Tie-Bar
$1.54Add to cartInstallation: The supporting bracket is screwed to the tie-bar, the retaining plate to the head or foot Mounting: Screw-mounted Use #6 and #8 flathead screws Application: For beds with central tie-bar Material: Steel Finish: Galvanized Capable of separation The bed elements are securely held by the angled retaining flanges Supplied with 1 male part 1 …
Hafele Double Fitting, for Beds with Central Tie-BarRead More
-
Remove from Wishlist
Hafele JCN Nut, 1/4-20
$0.32 – $0.36Select options This product has multiple variants. The options may be chosen on the product pageModel series: JCN Drive: Hex M4 Head diameter: 17 mm Material: Steel
-
Remove from Wishlist
SKU:HA-273.41.550
Hafele Bed Connector, for Central-Tie Bar and Slatted Frame Supports
$3.19Add to cartFinish: Blue galvanized Application: For single and double beds as slatted frame/sofa frame or central tie-bar support Adjustment: Three-stage vertical adjustment, 4 attachment positions Installation: For screw fixing Height: 140 Material: Steel Use #8 flat head screw Installation reference When used on double beds with a 35 mm thick central tie-bar, the mounting plates must …
Hafele Bed Connector, for Central-Tie Bar and Slatted Frame SupportsRead More
-
Remove from Wishlist
Hafele Countersunk Connector, Häfele Confirmat, countersunk head, for drill hole Ø 5 mm, PZ3
$0.05 – $0.18Select options This product has multiple variants. The options may be chosen on the product pageExtremely strong With tip for easy insertion into blind hole Countersink is not necessary as the ribs countersink hole Head diameter: 10 mm Drill hole diameter: 5 mm Drive: PZ3 cross slot Material: Steel
-
Remove from Wishlist
SKU:HA-260.09.560
Hafele Rear Panel Connector, Häfele Ixconnect RPC G 13/20
$0.06Add to cartFinish/color: Gray For use as rear panel connector in small furniture Easy installation without tools No additional drill hole is needed Suitable for concealed applications as the installation is carried out from the rear side of the furniture Application: For fixing the rear panel in small furniture for use as vibration protection in wooden drawers …
Hafele Rear Panel Connector, Häfele Ixconnect RPC G 13/20Read More
-
Remove from Wishlist
SKU:HA-262.11.113
Hafele Claw Connector, Häfele Ixconnect CC 8/5/30, Zinc alloy
$0.16Add to cartOne-piece connector Suitable for thin front panels Concealed application Easy assembly without tools Removable Application: For fixing front panels of wooden drawers for use with chipboard For wood thickness: Front panel and drawer sides: From (1/2″) 12 mm For drill hole diameter: (3/16″) 5 mm (5/16″) 8 mm Installation: Pre-assembly in the drawer side by …
Hafele Claw Connector, Häfele Ixconnect CC 8/5/30, Zinc alloyRead More
-
Remove from Wishlist
-
Remove from Wishlist
SKU:HA-271.03.930
Hafele Bed Fitting, Noval K
$10.41Add to cartFinish: Silver, chromated Features: With pointed teeth and cranked hook component Mounting: Screw-mounted Material: Steel 1 set is required to connect 4 corners Supplied with 4 female parts 2 left hooks 2 right hooks
-
Remove from Wishlist
Hafele Countersunk Connector, Confirmat, Hex Socket, 3 mm
$0.04 – $0.05Select options This product has multiple variants. The options may be chosen on the product pageLong shank, deep-cut thread ensures accurate, close-fitting joints between panels High pull-out resistance and strength at the corners Only a single drilling operation for side panels and shelves Consistently secure joints are assured even with repeated assembly and disassembly Drive: With hexagon socket, SW3 Material: steel Drill hole diameter: 4 mm Shaft diameter: 5 mm …
Hafele Countersunk Connector, Confirmat, Hex Socket, 3 mmRead More
