Features:
- Pocket Door System – XL Slide
- With cables attached
- Especially suited for use in larger door cabinets such as home theater applications
- Easily accessible from front of cabinet
- Cable runs parallel with slide to ensure smooth operation, eliminating excess pressure on slide
- Positive out-stop on slide keeps door in alignment in closed position
- Soft rubber roller on slide front protects door front from scratches and marring
- For use with doors up to 60″ high, 24″ wide & weighing up to 35 lbs.
- Accommodates doors up to 1-1/4″ thick
- Steel cable is black nylon coated to reduce friction and enhance appearance
- Travel distance = slide length minus 114 mm (4-1/2″)
- Black finish
- Jigs or fixtures are not required to locate slide top and bottom, integral location tabs locate slides in cabinet
- Adjustment screws allow maximum adjustability, cable tensioning adjustment is located at the slide front
- Minimal installation and adjustment time for lower production costs
- 32 mm compatible
- Patent pending
- Note: Accessory pack required to complete assembly – must order separately
| Length | Travel Distance | Item No. |
|---|---|---|
| 408mm (16-1/16″) | 294mm (11-1/2″) | 408.24.315 |
| 440mm (17-5/16″) | 326mm (12-7/8″) | 408.24.324 |
| 504mm (19-7/8″) | 390mm (15-3/8″) | 408.24.333 |
| 536mm (21-1/8″) | 422mm (16-5/8″) | 408.24.342 |
| 600mm (23-5/8″) | 486mm (19-1/8″) | 408.24.351 |
| 664mm (26-1/8″) | 550mm (21-3/4″) | 408.24.360 |
Description:
This Pocket Door System XL Slide by Hafele comes with cables attached and is easily accessible from front of cabinet. Especially suited for use in larger door cabinets such as home theater applications, the cable in the system runs parallel with the slide to ensure smooth operation, eliminating excess pressure on the slide.
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
408mm (16-1/16″) to 664mm (26-1/8″) Lengths
Suggested products
-
Remove from Wishlist
Hafele Inlay Door Accessory Pack, 35 mm, Häfele Slido F-Park 71 16A
$11.27 – $11.78Select options This product has multiple variants. The options may be chosen on the product pageFor door thickness: (5/8 – 3/4″) 16 – 19 mm T X Y 1 16 – 19 (5/8 – 3/4”) 45 (1 3/4”) T + 1 (1/32”) 2 19 – 32 (3/4 – 1 1/4”) 64 (2 1/2”) T + 1 (1/32”) 3 19 – 22 (3/4 – 7/8”) 50 (2”) 1 (1/32”) Supplied with: Mounting …
Hafele Inlay Door Accessory Pack, 35 mm, Häfele Slido F-Park 71 16ARead More
- Remove from Wishlist
-
Remove from Wishlist
Hafele Inlay Door Accessory Pack, 40 mm, Häfele Slido F-Park 71 16A
$17.98 – $18.12Select options This product has multiple variants. The options may be chosen on the product pageFor door thickness: (3/4 – 1 1/4″) 19 – 32 mm T X Y 1 16 – 19 (5/8 – 3/4”) 45 (1 3/4”) T + 1 (1/32”) 2 19 – 32 (3/4 – 1 1/4”) 64 (2 1/2”) T + 1 (1/32”) 3 19 – 22 (3/4 – 7/8”) 50 (2”) 1 (1/32”) Supplied …
Hafele Inlay Door Accessory Pack, 40 mm, Häfele Slido F-Park 71 16ARead More
Related products
-
Remove from Wishlist
SKU:HA-342.75.226
Hafele Flap Hinge, Plano Medial, Chrome plated white
$3.45Add to cartFeatures: No projecting parts on the cabinet or flap Mounting: Screw-mounted Material: Plastic/zinc alloy Color: White Dimensions: (W = side to side) (D = front to back) (H = top to bottom)
-
Remove from Wishlist
SKU:HA-325.02.702
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening Angle
$23.96Add to cartFeatures: Hafele 90° Miter Flap Hinge Ideal for Doors and Flaps Material: Cup: Die-Cast Zinc/Hinge Arm: Steel Finish: Nickel Plated Maximum Door Opening Angle: 90° Three-way Adjustable: 3mm (1/8”) H, 1.5mm (1/20”) in Depth and Width Screw-Mounted Chamfer: 45° Door Thickness: 16mm (5/8”) to 22mm (3/4”) Side Panel Thickness: 16mm (5/8”) to 22mm (3/4”) Use …
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening AngleRead More
-
Remove from Wishlist
SKU:HA-373.58.919
Hafele Firmatop Cabinet Lid Stay, 250mm (9-13/16″) Length
$20.57Add to cartFeatures: Hafele Firmatop Cabinet Lid Stay With internal spring Dual-purpose integrated spring holds lid securely in open or closed position Can use one or two stays, depending on lid weight Reversible, can be installed left or right Chrome-Plated finish Made of Brass Description: This Hafele Firmatop Cabinet Lid Stay features a dual-purpose integrated spring, which …
Hafele Firmatop Cabinet Lid Stay, 250mm (9-13/16″) LengthRead More
-
Remove from Wishlist
SKU:HA-421.46.958
Hafele Top/Bottom Mount Full Extension Slide, 275 lbs, 22-5/8″ with Soft Close
$360.00Add to cartFeatures: Top/Bottom Mounted Pantry Pullout Slide Set Rated to Support 275 lbs Maximum Pullout Size: 18″W x 72″H 22-5/8″ Extension Horizontal and Vertical Adjustment Soft Close Mechanism with Rear Stop No Deflection in Fully Extended Position Vertical Clearance: 5-7/16″ Description: Hafele’s Full Extension Top/Bottom Mounted Pantry Pullout is designed to support the most ambitious of …
Hafele Top/Bottom Mount Full Extension Slide, 275 lbs, 22-5/8″ with Soft CloseRead More
- Remove from Wishlist
-
Remove from Wishlist
SKU:HA-643.12.201
Hafele Tavoflex Table Top Lift-Up Fitting, Installation Width: 698mm (27-1/2″)
$166.16Add to cartFeatures: Tavoflex Table Top Lift-Up Fitting Installation Width: 698mm (27-1/2″) For raising and forward pivoting of table tops and worktops Table top is lifted easily using gas-filled struts Integrated soft closing mechanism provides gentle, silent closing Safety catch prevents unintentional closing Side covers prevent fingers from being trapped For screw mounting into pre-drilled 32mm (1 …
Hafele Tavoflex Table Top Lift-Up Fitting, Installation Width: 698mm (27-1/2″)Read More
-
Remove from Wishlist
SKU:HA-373.53.334
Hafele Lid Stay, Cara-Top, Black
$5.16Add to cartFeatures: Mounting: Metal mounting plate rotates 180º to switch from left to right Application: For light-duty use Material: Housing: Plastic, angular bracket: Steel Finish: Zinc-plated Color: Housing: Black Mounting: Metal mounting plate rotates 180º to switch from left to right Installation: For screw fixing Features: With adjustable spring Finish/color: Zinc-plated, Housing: Black Dimensions: (W = …
-
Remove from Wishlist
SKU:HA-361.93.240
Hafele Non-Bore All Metal Glass Door Cabinet Hinge with 180° Opening Angle, Pair
$18.63Add to cartFeatures: Hafele 180° All Metal Inset Glass Door Hinge Econo Version of a Non-Bore Glass Door Hinge For Lightweight Glass Doors Material: Die-Cast Zinc Finish: Textured Chrome Plated Matt Maximum Door Opening Angle: 180° With Catch Screw-Mounts to Side of Cabinet Vertical Adjustment with Oblong Holes Maximum Door Weight: 4kg (8.8 lbs.) Per Pair of …
Hafele Non-Bore All Metal Glass Door Cabinet Hinge with 180° Opening Angle, PairRead More
-
Remove from Wishlist
SKU:HA-361.61.000
Hafele Glass Door Pivot Hinge, Opening Angle 210°, Stainless Steel, External, For Glass/Wood Constructions
$106.96Add to cartThis glass pivot hinge by Hafele is available for glass and wood constructions as well as inset doors. Each pivot hinge features a satin stainless steel finish and includes a threaded pin in the hinge which allows the door to be removed after bonding.
-
Remove from Wishlist
SKU:HA-361.50.820
Hafele HA-361.50.820 Desk or Flap Pivot Furniture Hinge with 90° Opening Angle (Sold as Pair)
$82.03Add to cartFeatures: Hafele 90° Desk Pivot Hinge For Flap Ideal for Dropleaf Furniture Material: Brass Finish: Polished Brass Maximum Door Opening Angle: 90° Mounts on Drop Leaves Screw-Mounted With Stop Sold as Pair Description: The 90° Desk Pivot Cabinet Hinge by Hafele mounts on drop leaves, screw-mounted, with stop, measures 150mm (5-7/8”) in width and available …
