Hafele A-Flatli... 
Hafele Foldaway... 
1" x 3/4" FTGxC... 
Hafele Rear Pan... 
- Panel clips offer an easy and economical solution for installation of wall panels:
- Interlocking profile of clips and rails provide a secure connection
- Mounted fittings are concealed
- Mount clips with #8 pan head screws
-Mount clips on the back side of panel
-Mount rails horizontally on wall surface and fasten at stud locations
-Hang panel on wall rail
Width: (1 7/8″) 48 mm
Height: (.175″) 4 mm
Mounting: Screw mounted
Material: Aluminum
Finish: Mill finish
Related products
-
Remove from Wishlist
Hafele Countersunk Connector, Confirmat, Hex Socket, 3 mm
$0.04 – $0.05Select options This product has multiple variants. The options may be chosen on the product pageLong shank, deep-cut thread ensures accurate, close-fitting joints between panels High pull-out resistance and strength at the corners Only a single drilling operation for side panels and shelves Consistently secure joints are assured even with repeated assembly and disassembly Drive: With hexagon socket, SW3 Material: steel Drill hole diameter: 4 mm Shaft diameter: 5 mm …
Hafele Countersunk Connector, Confirmat, Hex Socket, 3 mmRead More
-
Remove from Wishlist
SKU:HA-267.22.900
Hafele Two-Piece Connector, Press-Fit, Permanent, Steel
$3.70Add to cartColor: Brown Features: 2-piece dowel connector Material: Steel dowel headed screw, polyamid sleeve Supplied with Screws Sleeves 10 centering pins
-
Remove from Wishlist
SKU:HA-271.61.306
Hafele Keyhole Fitting, Bed Connector
$1.14Read moreFinish: Unfinished Extremely strong and invisible Dimensions of recesses should be taken directly from the fittings Use #6 flat head screw to install plate & Use #10 pan head screw for keyhole Components can be assembled or disassembled without tools Profiled plates for machined-recess installation Can also be inserted into a groove Features: Concealed hanger …
-
Remove from Wishlist
Hafele Joint Connector Bolt, 1/4-20, Type JCB-B
$0.09 – $0.32Select options This product has multiple variants. The options may be chosen on the product pageModel series: JCB-B Drive: Hex M4 Type of head: Flat head Head diameter: 17 mm Material: Steel
-
Remove from Wishlist
Hafele Rail, with Dovetail Groove
$255.93 – $295.83Select options This product has multiple variants. The options may be chosen on the product pageConcealed, tool less installation for shelves Provides solid reinforcing connections; self-reinforces if several shelves are used Stabilizes high and protruding components Easy to dismantle Length: (118 1/8″) 3000 mm Material: Aluminum Finish: Bright Installation 1. Mill groove for rail in front edge of shelf, 10.5 x 12 mm (7/16 x 1/2″) (H x W), insert …
-
Remove from Wishlist
SKU:HA-260.12.706
Hafele Rear Panel Bracket, for 32 mm Series Holes
$1.43Add to cartColor: White Application: For 32 mm series holes Mounting: Press fit Hole diameter: 5 mm Material: Plastic Use #6 pan head screw
-
Remove from Wishlist
-
Remove from Wishlist
SKU:HA-271.03.930
Hafele Bed Fitting, Noval K
$10.41Add to cartFinish: Silver, chromated Features: With pointed teeth and cranked hook component Mounting: Screw-mounted Material: Steel 1 set is required to connect 4 corners Supplied with 4 female parts 2 left hooks 2 right hooks
-
Remove from Wishlist
SKU:HA-273.03.515
Hafele Double Fitting, for Beds with Central Tie-Bar
$1.54Add to cartInstallation: The supporting bracket is screwed to the tie-bar, the retaining plate to the head or foot Mounting: Screw-mounted Use #6 and #8 flathead screws Application: For beds with central tie-bar Material: Steel Finish: Galvanized Capable of separation The bed elements are securely held by the angled retaining flanges Supplied with 1 male part 1 …
Hafele Double Fitting, for Beds with Central Tie-BarRead More
-
Remove from Wishlist
SKU:HA-261.30.790
Hafele Dovetail Sleeve, for Screw Mounting
$0.97Add to cartFinish/color: Gray For use as rear panel connector in small furniture Easy installation without tools No additional drill hole is needed Suitable for concealed applications as the installation is carried out from the rear side of the furniture Application: For fixing the rear panel in small furniture for use as vibration protection in wooden drawers …
