Category
- Uncategorized
- Bathroom and Kitchen
- Chemicals
- Daluci
- Fire Protection
- Hardware
- Cabinet Hinges and Slides / Door Hinges and Slides
- Hinges and Accessories
- Opening Systems
- Articulated Fittings for Chests
- Integrated Vertical Opening Systems
- Opening System Accessories
- Miscellaneous Pieces
- Parts and Accessories for Atmos Opening System
- Parts and Accessories for Aventos Systems
- Parts and Accessories for FREElift and Duo Opening Systems
- Parts and Accessories for K12 Opening System
- Parts and Accessories for SLU Opening System
- Parts and Accessories for Wind and Pacta Opening Systems
- Push-to-Open Device
- Suspension Arm with Hinges
- Tambour Doors
- DIY Tambour Door with Parts
- Parts and Accessories (Wood PVC and Metallic)
- Parts and Accessories for PVC and Metallic Tambour Unit
- 90° Corner Track
- Center Stop for Double Horizontal Tambour Doors
- Cover Profile
- Gliders
- Handle Gliders (Non-Locking PVC)
- Handle Profile Gliders (Locking PVC)
- Handle Stopper
- Handles
- Heavy-Duty Roller Extension
- Heavy-Duty Roller System (Rehau C3 System)
- Left and Right Brake
- Rails
- Recessed Spiral Track
- Slat Gliders
- Slowing System (C6 Rehau)
- Tambour Slat
- Tape
- Parts and Accessories for Wood Tambour Unit
- Parts and Accessories for PVC and Metallic Tambour Unit
- Parts and Accessories (Wood PVC and Metallic)
- Ready to Assemble Kits
- DIY Tambour Door with Parts
- Slides and Drawer Box Systems
- Drawer Box Systems
- Parts and Accessories
- Facade Adjusters
- For 908
- For Integra
- For Legrabox
- For Metabox
- For OPTIMIZ-R
- For Tandembox Intivo/Antaro
- For Tandembox Plus
- For Ten
- For Vionaro
- Gallery Tubes and Rods
- Handles for Drawer
- Locking devices
- Miscellaneous
- SERVO-DRIVE
- Slide Brackets and Fixtures
- Soft-Close Accessories
- Space Step System – Parts and Accessories
- Spacers
- Stabilizers
- Tools and Jigs
- Slides
- Space Step
- Closet Storage Hardware
- Connectors & Shelf Supports
- Counter Partition
- Decorative Cabinet Door Hardware
- Cabinet Hardware – Pulls and Knobs
- Decorative Accessories for Furniture Cremones and Bolts
- Decorative Hooks
- Floor Registers and Air Vents
- LB Classic hardware
- Luxury Hardware
- Switch Plates
- Wire Mesh
- Decorative Corbels and Brackets
- Glues, Silicones, and Caulking
- Kitchen and Bathroom Hardware
- Bathroom
- Kitchen
- Base Cabinets
- Corner Cabinet Storage Systems
- Countertops and Accessories
- Drawer Organization
- Functional Accessories
- Hoods Microwave Ovens and Vacuums
- Stainless Steel Accessory System
- Under-Sink Cabinets
- Upper Cabinets Storage Systems
- Wall Unit and Pantry Cabinets Storage Systems
- Wastebins and Recycling Centers
- Wine Cellars
- Light Fixture Hardware
- Office Furniture Parts
- Replacement Furniture Hardware
- Bedroom Solutions
- Bumpers
- Cabinet Levelers
- Casters
- Counter Lift System
- Floor Protection
- Furniture Legs
- Furniture Shelf Pins
- Glides and Metal Levelers
- Latches and Catches
- Locks
- Suspension Hardware
- Suspension Systems
- Swivel Platforms
- Table Hardware
- Table Legs
- Trash Grommets
- TV Lifts and TV Wall Supports
- Wall Shelf Supports
- Screws and Fasteners
- Sliding Door Hardware for Cabinet Doors and Interior Sliding Door Hardware
- Wholesale Door Hardware
- Bathroom Partition Hardware
- Boards
- Door Accessories, Buffers & Stops
- General Hardware
- Hardware for Fences, Decks, and Gardens
- Residential and Commercial Door Hardware
- Back-to-Back Ladder Style Handles
- Ball Catches
- Bumper and Doorstop
- Commercial Door Locksets
- Crémone Bolts and Espagnolettes
- Door Closers
- Door Flush Bolts
- Floor recessed strike for lock or bolt
- Glass Swing Door Handles and Locks
- Handles and Locks for Sliding Doors
- Handles for Garden and Fence Doors and Window
- Handles for Sliding Barn Doors
- Industrial Door Handles
- Industrial Protective Boards
- Push and Pull Handles
- Residential Door Locksets
- Security Hardware
- SOSS UltraLatch
- Surface Bolts
- Tubular Pull Handles
- Security Mirrors
- Staircase Components
- Tubular hardware in stainless steel and brass
- Armrail and Footrest
- Clamps, adaptors, cables, and rods
- Components for On level Clear View Glass Railings
- Frameless Windscreen
- Handrail Brackets
- Handrails and Components
- Juliet Balcony
- Mini Post System for Glass Railing
- Pool Gate Fittings and Glass Fencing Hardware
- Posts, Supports, and Trim
- Standoff Glass Railing Components
- Woodworking Jigs and Jig Templates
- Cabinet Hinges and Slides / Door Hinges and Slides
- Heating
- Home Décor
- Homepage-chemicals
- Homepage-Hardware
- Homepage-heating
- Homepage-Plumbing
- Homepage-tools
- New Items
- Outdoor Equipment
- Plumbing
- Black Malleable Fittings
- Copper/Brass Fittings
- Brass and Copper Fittings
- 90° Drop Ear Elbows
- C x C x F Tees
- C x F x C Tees
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings
- Copper Reducer Couplings
- Copper Reducer Fitting Adapters
- Copper Tees
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- Dielectric Unions
- Brass Fittings
- Compression Fittings
- Copper Coils
- Copper Fittings (Domestic)
- 90° Female Drop Ear Elbows
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings With Stop
- Copper Couplings Without Stop
- Copper Female Street Adapters
- Copper Fitting Reducers
- Copper Male Street Adapters
- Copper Reducer Couplings
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- CxCxC Tees
- CxF 90° Elbows
- Brass and Copper Fittings
- Drains
- Fixtures Drain Connections
- Fixtures Water Connections
- Hangers and Supports
- Hot Water Heaters
- Insulation
- Miscellaneous
- Nipples
- No Hub Fittings
- Couplings
- No Hub Cast Iron Fittings (Domestic)
- No Hub Cast Iron 1/16 Bends
- No Hub Cast Iron 1/4 Bends
- No Hub Cast Iron 1/8 Bends
- No Hub Cast Iron Blind Caps
- No Hub Cast Iron Cleanout Ferrule with Plugs
- No Hub Cast Iron Cleanout Tees
- No Hub Cast Iron Double 1/4 Bends
- No Hub Cast Iron Double Sanitary Tap Tees
- No Hub Cast Iron Double Sanitary Tees
- No Hub Cast Iron Double Wyes
- No Hub Cast Iron P-Traps
- No Hub Cast Iron Sanitary Tap Tees
- No Hub Cast Iron Sanitary Tees
- No Hub Cast Iron Short Reducers
- No Hub Cast Iron Tap 1/4 Bends
- No Hub Cast Iron Upright Wyes
- No Hub Cast Iron Wyes
- No Hub Cast Long Sweeps
- No Hub Cast Short Sweeps
- Pumps
- PVC
- PVC Ball Valves
- PVC Check Valve
- PVC Drain Fittings (DWV)
- PVC DWV 45° Elbows
- PVC DWV 45° Street Elbows
- PVC DWV 90° Elbows
- PVC DWV 90° Street Elbows
- PVC DWV Adjustable P-Trap w/Union
- PVC DWV Caps
- PVC DWV Closet Flanges
- PVC DWV Couplings
- PVC DWV Double Sanitary Tees
- PVC DWV Double Wyes
- PVC DWV Female Adapters
- PVC DWV Fitting Adapters
- PVC DWV Fitting Trap Adapters
- PVC DWV Male Adapters
- PVC DWV P-Traps
- PVC DWV Reducer Couplings
- PVC DWV Sanitary Tees
- PVC DWV Trap Adapters
- PVC DWV Wyes
- PVC Pressure Fittings (Schedule 40)
- Valves
- Power Tools and Accessories
Hafele Lid Stay, 195mm (7-11/16″) or 270mm (10-5/8″) Length, Unhanded, Satin Stainless Steel
$52.08 – $58.80
Features:
- Hafele Lid Stay
- Holds lid in the open position
- Lift up lid to release
- Only one stay required per lid
- Load bearing capacity: Max. 33 lbs (15 kg)
- Unhanded
- Satin finish
- Made of 304 Stainless Steel
Description:
Made of 304 Stainless Steel, this Hafele Lid Stay holds a lid in the open position, and only one stay is required per lid. The lid stay has a load bearing capacity max of 33 lbs (15 kg), and is unhanded with a satin finish.
Dimensions:
(W = side to side) (D = front to back) (H = top to bottom)
C | L1 | L2 | L3 | A | B | Door Height | Item Number |
---|---|---|---|---|---|---|---|
195mm (7-11/16″) | 148mm (5-13/16″) | 121m (4-3/4″) | 129mm (5-1/16″) | 133mm (5-1/4″) | 62mm (2-7/16″) | 250 ? 350mm (9-13/16 ? 13-3/4″) | 373.89.000 |
270mm (10-5/8″) | 185mm (7-5/16″) | 158mm (6-1/4″) | 166mm (6-9/16″) | 170mm (6-11/16″) | 100mm (3-15/16″) | 320 ? 500mm (12-5/8 ? 19-11/16″) | 373.89.001 |
Weight | N/A |
---|---|
Dimensions | N/A |
Length | 195mm (7-11/16'') Length, 270mm (10-5/8'') Length |
Brand |
Related products
-
SKU:HA-361.46.200
Hafele HA-361.46.200 Inset Cabinet Hinge for Lightweight Glass Door 38.5mm (1-1/2”) Height, 180° Opening Angle
$8.72Add to cartFeatures: Hafele 180° Inset Glass Door Hinge Material: Steel Finish: Chrome Plated Polished Maximum Door Opening Angle: 180° For Lightweight Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted For Inset Doors For Glass Thicknesses 4mm (5/32”), 5mm (13/16” ) or 6mm (15/64”) Maximum Door Weight: 4kg (8.8 lbs.) or Per …
-
SKU:HA-361.81.900
Hafele Badge Non-Bore Hinge and Lock System for Lightweight Glass Cabinet Doors
$21.71Add to cartFeatures: Hafele Badge Hinge & Lock System Inset Glass Door Top/Bottom Hinge Set Includes Top and Bottom Hinges Non-Bore Hinge and Lock for Lightweight Glass Doors Material: Die-Cast Zinc Finish: Aluminum Maximum Door Opening Angle: 90° or 180° Screw-Mounted Stylish Design for Inset Doors Edge Mounts to Glass Door with one ABS plastic screw Horizontal …
Hafele Badge Non-Bore Hinge and Lock System for Lightweight Glass Cabinet DoorsRead More
-
SKU:HA-361.46.010
Hafele HA-361.46.010 Inset Glass Door Cabinet Hinge for Lightweight Glass Door 38.5mm (1-1/2”) Height, 180° Opening Angle
$10.04Add to cartFeatures: Hafele 180° Inset Glass Door Hinge Material: 304 Grade Stainless Steel Finish: Stainless Steel Maximum Door Opening Angle: 180° For Lightweight Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted For Inset Doors For Glass Thicknesses 4mm (5/32”), 5mm (13/16” ) or 6mm (15/64”) Maximum Door Weight: 4kg (8.8 lbs.) …
-
SKU:HA-373.58.919
Hafele Firmatop Cabinet Lid Stay, 250mm (9-13/16″) Length
$20.57Add to cartFeatures: Hafele Firmatop Cabinet Lid Stay With internal spring Dual-purpose integrated spring holds lid securely in open or closed position Can use one or two stays, depending on lid weight Reversible, can be installed left or right Chrome-Plated finish Made of Brass Description: This Hafele Firmatop Cabinet Lid Stay features a dual-purpose integrated spring, which …
Hafele Firmatop Cabinet Lid Stay, 250mm (9-13/16″) LengthRead More
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Free Shiping
On orders over $99

Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.