Hafele Foldaway Bed Fittings Hardware Kit – Widthwise Mounting

SKU: HA-271.95.204

$430.24

Features:

  • Hafele Foldaway Bed Fittings Hardware Kit – Widthwise Mounting
  • Furniture supplied by the customer
  • Allows for the construction of foldaway beds according to your own plan
  • The cabinet and bedbox constructions require a wood thickness of 20mm
  • A minimum 40×40 square beam is needed on four sides as slatted frame support
  • It is essential for foldaway beds to be secured against tipping, according to EN 1129 (check the floor for suitability)
  • The angular feet with mounting plate are screw-mounted to the foot side of the bed frame and to the inside of the front panel
  • Instead of legs, large handles can be mounted which serve as supports when the bed is in the down position
  • Another possibility is an overhead shelf
  • Note: Successful and safe installation of fitting hardware set and construction of bed requires a professional skill level.
  • Supplied With:
    Foldaway fittings with pivot bearing and positioning bolt for gas pistons
    2 Safety Stops
    Safety lever with stop plate
    Mounting material
    Detailed Mounting Instructions

Required Items:

    • Note: Order gas pistons separately depending on bed weight – 2 pcs. Required per bed
    • Pre-stressed with tightening strap
    • Tightening strap needed to install or remove piston from fitting set

     Bed Weight  Pushing Force  Item No.
     880 lbs.  400 N  271.99.122
     110 lbs.  500 N  271.99.140
     132 lbs.  600 N  271.99.168
     154 lbs.  700 N  271.99.186
    • With contact closing
    • Needed to install or remove piston from fitting set

     For Mattress Width  Item No.
     up to 35-7/16″  271.87.920
     up to 47-1/4″  271.87.921
     up to 55-1/8″  271.87.922
    • To support the opening
    • When opening the bed, the angular feet must be extracted, turned by 90? and retracted to the stop
    • Steel, powder-coated
 For selecting the gas-loaded spring, the bed weight is needed.
 
Bed box and slatted mattress frame + Mattress and bedding
  = Bed weight
 Mattress width + 2x bed frame thickness + 125mm
  = internal cabinet height
 Mattress length + 2x bed frame thickness + 54mm
  = internal cabinet width
 Gap on four sides between cabinet and front panel
  = minimum 4mm

Description:

This Hafele Foldaway Bed Fittings Hardware Kit with Widthwise Mounting allows for the construction of foldaway beds according to your own plan. The cabinet and bedbox constructions require a wood thickness of 20mm and a minimum 40×40 square beam is needed on four sides as slatted frame support.

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Max Width: 90-9/16″
Max Height: 59″
Min. Depth: 16-9/16″

Weight 14.81 lbs
Dimensions 22.04 × 12.59 × 4.33 in
Brand

Reviews

There are no reviews yet.

Be the first to review “Hafele Foldaway Bed Fittings Hardware Kit – Widthwise Mounting”

Your email address will not be published. Required fields are marked *