1111B-DBZ Distr... 
Hafele HA-192.4... 
172-N Natural C... 
- 2″ Full Flow Pump Code
- Checks backflow of water and sewer gas
- Simple to install (no threading of pipe required)
- Neoprene gasket and flapper, weighted with heavy stainless steel metal backing plates and stainless steel rivet
- Can be installed on vertical or horizontal line
- Reduces motor and pump noise from plumbing system
- Meets requirements of Wisconsin Uniform Plumbing Code
- Flexible neoprene slip x slip union includes stainless steel clamps for low pressure systems. Avoid more than 10′ (3 m) static head above the check valve. 4.3 PSI at 130 °F (54 °C).
- Stainless steel screws
- Extra wide hinge to reduce hinge stress
Related products
- Remove from Wishlist
-
Remove from Wishlist
SKU:7667
1″ IPS Ball Valve (Lead Free)
$16.50Add to cartFull Port Ball Valve Thread Conform ANSI B1.20.1 Forged Brass Body Blow Out Proof Stem Design Packing Nut & Packing On The Stem Seal Stainless Steel Ball 600 psi (WOG) 150 psi (WSP) Service Tempature Range : -20° F to 300° F CSA Approved, Per NSF / ANSI-61
-
Remove from Wishlist
SKU:2280
1″ IPS Swing Check Valve
$13.23Add to cartDie cast plumbing and heating specification valves for use in low pressure, domestic potable water systems. Used to prevent back-flow of fluids.
-
Remove from Wishlist
SKU:2273
1/2″ Sweat Ball Valve
$4.80Read morePressure rating 200 psi wog Temperaure range: – 20°F to 300°F Forged brass body Conforms to: ASME B16.22 Approved to: UL 125, Per NSF/ANSI-61, NSF/ANSI-372, IGC-157
-
Remove from Wishlist
SKU:7662
1-1/2″ Sweat Ball Valve (Lead Free)
$32.88Add to cartPressure rating 200 psi wog Temperaure range: – 20°F to 300°F Forged brass body Conforms to: ASME B16.22 Approved to: UL 125, Per NSF/ANSI-61, NSF/ANSI-372, IGC-157
-
Remove from Wishlist
SKU:7664
1/2″ IPS Ball Valve (Lead Free)
$8.70Add to cartFull Port Ball Valve Thread Conform ANSI B1.20.1 Forged Brass Body Blow Out Proof Stem Design Packing Nut & Packing On The Stem Seal Stainless Steel Ball 600 psi (WOG) 150 psi (WSP) Service Tempature Range : -20° F to 300° F CSA Approved, Per NSF / ANSI-61
-
Remove from Wishlist
SKU:4026
1/8″ IPS Ball Valve
$3.76Read moreFull Port Ball Valve Thread Conform ANSI B1.20.1 Forged Brass Body Blow Out Proof Stem Design Packing Nut & Packing On The Stem Seal Stainless Steel Ball 600 psi (WOG) 150 psi (WSP) Service Tempature Range : -20° F to 300° F CSA Approved, Per NSF / ANSI-61
- Remove from Wishlist
-
Remove from Wishlist
SKU:3311
1/2″ IPS Swing Check Valve
$10.24Add to cartDie cast plumbing and heating specification valves for use in low pressure, domestic potable water systems. Used to prevent back-flow of fluids.
-
Remove from Wishlist
SKU:2741
1-1/2″ IPS Swing Check Valve
$29.82Add to cartDie cast plumbing and heating specification valves for use in low pressure, domestic potable water systems. Used to prevent back-flow of fluids.
