Category: Sewage Pumps
Sewage Pumps
Showing all 13 results
-
SKU:84421/2 HP Duplex Sewage System (1100-Series, Model 1102LE51M)
$1,842.62Read moreHeavy duty structural foam basin; 30″ diameter x 36” high; 110 gallon capacity Completely assembled system with piping included Floats for control unit factory pre-set* 4″ inlet hub with rubber pipe seal Heavy, 1/4″ enamel coated steel cover with separate pump access covers and a 10″ diameter inspection cover (Fiberglass cover assembly available) Pump restraints …
1/2 HP Duplex Sewage System (1100-Series, Model 1102LE51M)Read More
-
SKU:72021/2 HP Pro380 Simplex Sewage Package (Model P382LE51)
$705.00Read moreThis simplex submersible sewage package has a large capacity shallow system design, featuring a large 24″ x 24″ basin perfect for bedrock and difficult soil conditions. The Pro-Series basin features the new QuickTree float system technology and there is no need to disconnect plumbing or remove the pump to inspect service or replace floats. QuickTree floats are preset at the factory for optimum operating levels and should not be adjusted.
-
SKU:87011/2 HP Simplex Sewage Package (Model SEV412)
$620.00Read moreThis simplex sewage package is ideal for residential and commercial sewage or sump applications. They are designed to handle wastes from lavatories, laundry tubs, floor drains, water closets, etc., and will pump the water from below ground “uphill” to the sewer.
-
SKU:86644/10 HP Sewage Pump (9SN-Series, Model 9SN-CIA-RF)
$311.80Read moreThe 9SN Series submersible effluent pump from Little Giant is specifically engineered to handle the tough demanding tasks for wastewater and effluent waste transfer with high efficiency and long term dependability. Ideal for use in residential, commercial, industrial, and agricultural applications with light to medium transfer demands such as dewatering, effluent waste, wastewater, and handling where such materials must be moved upward from a collection area to sewer lines, septic lines, or drainage areas.
-
SKU:3780Liberty Pumps 1 HP Submersible Sewage Pump (LE100 Series, Model LE102A3)
$1,309.99Add to cartThis heavy duty pump is used for commercial and residential sewage applications. Liberty’s LE100-series is a 1 hp sewage pump with 2″ solids-handling capability. Constructed of heavy cast iron with a tough epoxy powder coat finish and stainless steel fasteners, the LE100 is designed for years of trouble-free performance. Its Quick-connect power cord allows for easy interchange.
-
SKU:8448Liberty Pumps 3/4 HP Sewage Pump (LE70-Series, Model LE71A2)
$750.00Read moreLiberty’s LE70-series is a 3/4 hp sewage pump with 2″ solids-handling capability. Constructed of heavy cast iron with a tough epoxy powder coat finish, stainless steel fasteners and rotor shaft, the LE70 is designed for durability.
-
SKU:8714Liberty Pumps 4/10 HP Duplex Sewage System (1100-Series, Model 1103LE41M)
$2,111.50Read moreHeavy duty structural foam basin; 30″ diameter x 36” high; 110 gallon capacity Completely assembled system with piping included Floats for control unit factory pre-set* 4″ inlet hub with rubber pipe seal Heavy, 1/4″ enamel coated steel cover with separate pump access covers and a 10″ diameter inspection cover (Fiberglass cover assembly available) Pump restraints …
Liberty Pumps 4/10 HP Duplex Sewage System (1100-Series, Model 1103LE41M)Read More
-
SKU:8504Liberty Pumps 4/10 HP Pro380 Simplex Sewage Package (Model P382LE41)
$693.99Add to cartThe Liberty Pump Pro 380, P382LE41, is a 4/10 HP, 115v simplex submersible sewage pump system with a sewage pump featuring the LE41 automatic sewage pump, which has two wide-angle piggyback mechanical floats. It also includes a 24″ x 24″ polyethylene tank with radial ribs for added strength and 4″ molded no-hub type inlet to accept flexible coupling, schedule 80 PVC discharge pipe and polypropylene cover. The Liberty Pump Pro 380 has a large design that can hold up to 41 gallons, allowing for fewer cycles and longer pump life which makes it perfect for difficult soil conditions.
-
SKU:8716Liberty Pumps 4/10 HP Sewage Pump (LE40-Series, Model LE41A)
$415.00Add to cartLiberty’s LE40-series is the perfect choice for residential sewage applications. Featuring all cast iron construction with an epoxy powder coat finish, stainless steel fasteners, quick-disconnect power cord and a vortex style impeller for superior solids handling.
Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.