Free Shipping on Orders over 99$

Category: Beam Clamps

Beam Clamps

Showing 1–16 of 17 results

  • SKU:8670

    1/2″ Black Junior Beam Clamp

    $1.45

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:1742

    1/2″ Black Wide Mouth Beam Clamp

    $1.45

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:2142

    1/2″ Electro-Galvanized Junior Beam Clamp

    $1.29

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:1986

    1/2″ Electro-Galvanized Wide Mouth Beam Clamp

    $1.70

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:1472

    3/4″ Black Junior Beam Clamp

    $6.04

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:1400

    3/4″ Black Wide Mouth Beam Clamp

    $3.22

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:938

    3/4″ Electro-Galvanized Beam Clamp

    $6.76

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:8669

    3/4″ Electro-Galvanized Wide Mouth Beam Clamp

    $6.76

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Read more
  • SKU:8667

    3/8″ Black Junior Beam Clamp

    $1.32

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Read more
  • SKU:3796

    3/8″ Black Wide Mouth Beam Clamp

    $1.47

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:1409

    3/8″ Electro-Galvanized Junior Beam Clamp

    $1.06

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:8668

    3/8″ Electro-Galvanized Wide Mouth Beam Clamp

    $0.88

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Read more
  • SKU:2616

    3/8″ Side Beam Connector Black

    $0.70

    Used for mounting to sides of wood beams using figure drive screws. Bottom hole is tapped for rod.

    Add to cart
  • SKU:1456

    5/8″ Black Junior Beam Clamp

    $2.23

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 inch (19.05mm). The open U design permits rod adjustment.

    Read more
  • SKU:4251

    5/8″ Black Wide Mouth Beam Clamp

    $2.54

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Add to cart
  • SKU:4796

    5/8″ Electro-Galvanized Junior Beam Clamp

    $2.87

    Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 11/4” (31.75mm). The open U design permits rod adjustment.

    Read more