Category
- Uncategorized
- Bathroom and Kitchen
- Chemicals
- Daluci
- Fire Protection
- Hardware
- Cabinet Hinges and Slides / Door Hinges and Slides
- Hinges and Accessories
- Opening Systems
- Articulated Fittings for Chests
- Integrated Vertical Opening Systems
- Opening System Accessories
- Miscellaneous Pieces
- Parts and Accessories for Atmos Opening System
- Parts and Accessories for Aventos Systems
- Parts and Accessories for FREElift and Duo Opening Systems
- Parts and Accessories for K12 Opening System
- Parts and Accessories for SLU Opening System
- Parts and Accessories for Wind and Pacta Opening Systems
- Push-to-Open Device
- Suspension Arm with Hinges
- Tambour Doors
- DIY Tambour Door with Parts
- Parts and Accessories (Wood PVC and Metallic)
- Parts and Accessories for PVC and Metallic Tambour Unit
- 90° Corner Track
- Center Stop for Double Horizontal Tambour Doors
- Cover Profile
- Gliders
- Handle Gliders (Non-Locking PVC)
- Handle Profile Gliders (Locking PVC)
- Handle Stopper
- Handles
- Heavy-Duty Roller Extension
- Heavy-Duty Roller System (Rehau C3 System)
- Left and Right Brake
- Rails
- Recessed Spiral Track
- Slat Gliders
- Slowing System (C6 Rehau)
- Tambour Slat
- Tape
- Parts and Accessories for Wood Tambour Unit
- Parts and Accessories for PVC and Metallic Tambour Unit
- Parts and Accessories (Wood PVC and Metallic)
- Ready to Assemble Kits
- DIY Tambour Door with Parts
- Slides and Drawer Box Systems
- Drawer Box Systems
- Parts and Accessories
- Facade Adjusters
- For 908
- For Integra
- For Legrabox
- For Metabox
- For OPTIMIZ-R
- For Tandembox Intivo/Antaro
- For Tandembox Plus
- For Ten
- For Vionaro
- Gallery Tubes and Rods
- Handles for Drawer
- Locking devices
- Miscellaneous
- SERVO-DRIVE
- Slide Brackets and Fixtures
- Soft-Close Accessories
- Space Step System – Parts and Accessories
- Spacers
- Stabilizers
- Tools and Jigs
- Slides
- Space Step
- Closet Storage Hardware
- Connectors & Shelf Supports
- Counter Partition
- Decorative Cabinet Door Hardware
- Cabinet Hardware – Pulls and Knobs
- Decorative Accessories for Furniture Cremones and Bolts
- Decorative Hooks
- Floor Registers and Air Vents
- LB Classic hardware
- Luxury Hardware
- Switch Plates
- Wire Mesh
- Decorative Corbels and Brackets
- Glues, Silicones, and Caulking
- Kitchen and Bathroom Hardware
- Bathroom
- Kitchen
- Base Cabinets
- Corner Cabinet Storage Systems
- Countertops and Accessories
- Drawer Organization
- Functional Accessories
- Hoods Microwave Ovens and Vacuums
- Stainless Steel Accessory System
- Under-Sink Cabinets
- Upper Cabinets Storage Systems
- Wall Unit and Pantry Cabinets Storage Systems
- Wastebins and Recycling Centers
- Wine Cellars
- Light Fixture Hardware
- Office Furniture Parts
- Replacement Furniture Hardware
- Bedroom Solutions
- Bumpers
- Cabinet Levelers
- Casters
- Counter Lift System
- Floor Protection
- Furniture Legs
- Furniture Shelf Pins
- Glides and Metal Levelers
- Latches and Catches
- Locks
- Suspension Hardware
- Suspension Systems
- Swivel Platforms
- Table Hardware
- Table Legs
- Trash Grommets
- TV Lifts and TV Wall Supports
- Wall Shelf Supports
- Screws and Fasteners
- Sliding Door Hardware for Cabinet Doors and Interior Sliding Door Hardware
- Wholesale Door Hardware
- Bathroom Partition Hardware
- Boards
- Door Accessories, Buffers & Stops
- General Hardware
- Hardware for Fences, Decks, and Gardens
- Residential and Commercial Door Hardware
- Back-to-Back Ladder Style Handles
- Ball Catches
- Bumper and Doorstop
- Commercial Door Locksets
- Crémone Bolts and Espagnolettes
- Door Closers
- Door Flush Bolts
- Floor recessed strike for lock or bolt
- Glass Swing Door Handles and Locks
- Handles and Locks for Sliding Doors
- Handles for Garden and Fence Doors and Window
- Handles for Sliding Barn Doors
- Industrial Door Handles
- Industrial Protective Boards
- Push and Pull Handles
- Residential Door Locksets
- Security Hardware
- SOSS UltraLatch
- Surface Bolts
- Tubular Pull Handles
- Security Mirrors
- Staircase Components
- Tubular hardware in stainless steel and brass
- Armrail and Footrest
- Clamps, adaptors, cables, and rods
- Components for On level Clear View Glass Railings
- Frameless Windscreen
- Handrail Brackets
- Handrails and Components
- Juliet Balcony
- Mini Post System for Glass Railing
- Pool Gate Fittings and Glass Fencing Hardware
- Posts, Supports, and Trim
- Standoff Glass Railing Components
- Woodworking Jigs and Jig Templates
- Cabinet Hinges and Slides / Door Hinges and Slides
- Heating
- Home Décor
- Homepage-chemicals
- Homepage-Hardware
- Homepage-heating
- Homepage-Plumbing
- Homepage-tools
- New In Items
- Outdoor Equipment
- Plumbing
- Black Malleable Fittings
- Copper/Brass Fittings
- Brass Fittings
- Compression Fittings
- Copper Coils
- Copper Fittings (Domestic)
- 90° Female Drop Ear Elbows
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings With Stop
- Copper Couplings Without Stop
- Copper Female Street Adapters
- Copper Fitting Reducers
- Copper Male Street Adapters
- Copper Reducer Couplings
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- CxCxC Tees
- CxF 90° Elbows
- Copper Fittings (Imported)
- 90° Drop Ear Elbows
- C x C x F Tees
- C x F x C Tees
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings
- Copper Reducer Couplings
- Copper Reducer Fitting Adapters
- Copper Tees
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- Dielectric Unions
- Drains
- Fixtures Drain Connections
- Fixtures Water Connections
- Hangers and Supports
- Hot Water Heaters
- Insulation
- Miscellaneous
- Nipples
- No Hub Fittings
- Couplings
- No Hub Cast Iron Fittings (Domestic)
- No Hub Cast Iron 1/16 Bends
- No Hub Cast Iron 1/4 Bends
- No Hub Cast Iron 1/8 Bends
- No Hub Cast Iron Blind Caps
- No Hub Cast Iron Cleanout Ferrule with Plugs
- No Hub Cast Iron Cleanout Tees
- No Hub Cast Iron Double 1/4 Bends
- No Hub Cast Iron Double Sanitary Tap Tees
- No Hub Cast Iron Double Sanitary Tees
- No Hub Cast Iron Double Wyes
- No Hub Cast Iron P-Traps
- No Hub Cast Iron Sanitary Tap Tees
- No Hub Cast Iron Sanitary Tees
- No Hub Cast Iron Short Reducers
- No Hub Cast Iron Tap 1/4 Bends
- No Hub Cast Iron Upright Wyes
- No Hub Cast Iron Wyes
- No Hub Cast Long Sweeps
- No Hub Cast Short Sweeps
- Pumps
- PVC
- PVC Ball Valves
- PVC Check Valve
- PVC Drain Fittings (DWV)
- PVC DWV 45° Elbows
- PVC DWV 45° Street Elbows
- PVC DWV 90° Elbows
- PVC DWV 90° Street Elbows
- PVC DWV Adjustable P-Trap w/Union
- PVC DWV Caps
- PVC DWV Closet Flanges
- PVC DWV Couplings
- PVC DWV Double Sanitary Tees
- PVC DWV Double Wyes
- PVC DWV Female Adapters
- PVC DWV Fitting Adapters
- PVC DWV Fitting Trap Adapters
- PVC DWV Male Adapters
- PVC DWV P-Traps
- PVC DWV Reducer Couplings
- PVC DWV Sanitary Tees
- PVC DWV Trap Adapters
- PVC DWV Wyes
- PVC Pressure Fittings (Schedule 40)
- Valves
- Power Tools and Accessories
Brand
Size
Category: Articulated Fittings for Chests
Articulated Fittings for Chests
Showing all 14 results
-
Designer Flap Stay for Wood Cabinet Door
$13.98 – $21.44Select optionsDescription For up-opening OR down-opening doors Up-opening doors: stays open at 75°, 90° and 100°. Down-opening doors: stays open at 90° only. Tension-adjustable using an Allen key (included) For wood doors between 300 and 500 mm long. Wide operating range: refer to chart for details. Uses very little place within the cabinet. Minimum required installation …
-
Hafele Double Door Lift-up Fitting Lid Stay, Free Fold Short, 22-13/16″ – 42″ (580-1067mm) Door Height, 4.6 – 38 lb Door Weight
$118.40Select optionsFeatures: Double Door Lift-up Fitting Lid Stay – Free Fold Short 22-13/16″ – 42″ (580-1067mm) Door Height 4.6 – 46 lb Door Weight For 2-piece wood or aluminum frame doors of equal size Even high front panels can be lifted up in a space-saving way Modern design thanks to clear-cut contours Minimum opening resistance, multi-position …
-
Hafele Folding Table Hinge 85mm (3-5/32”) Height
$7.23 – $9.21Select optionsFeatures: Hafele Folding Table Hinge Ideal for Wooden Tables Material: Steel Finish: Yellow Galvanized Flush-Mounted All Holes are Countersunk for Screws For Panel Thicknesses 19 to 22mm (3/4”) Internal Hinge Distance between Panels (Approximately) 5mm (1/5”) Description: The Folding Table Cabinet Hinge by Hafele is ideal for furniture table with flush-mounted installation, measures 85mm (3-5/32”) …
-
SKU:HA-325.00.708
Hafele GS 45/90 Miter Cabinet or Flap Hinge 1.5mm (1/20”) Wide with 135° Opening Angle
$19.80Add to cartFeatures: Hafele 135° GS 45/90 Miter Hinge Material: Cup: Die-Cast Zinc/Hinge Arm: Steel Finish: Nickel Plated Maximum Door Opening Angle: 135° Ideal for Doors and Flaps Three-way Adjustable: 3mm (1/8”) H, 1.5mm (1/20”) in Depth and Width Screw-Mounted Chamfer: 45° Required Door Thickness: 16mm (5/8”) to 22mm (3/4”) Side Panel Thickness: 16mm (5/8”) to 22mm …
Hafele GS 45/90 Miter Cabinet or Flap Hinge 1.5mm (1/20”) Wide with 135° Opening AngleRead More
-
SKU:HA-325.02.702
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening Angle
$23.96Add to cartFeatures: Hafele 90° Miter Flap Hinge Ideal for Doors and Flaps Material: Cup: Die-Cast Zinc/Hinge Arm: Steel Finish: Nickel Plated Maximum Door Opening Angle: 90° Three-way Adjustable: 3mm (1/8”) H, 1.5mm (1/20”) in Depth and Width Screw-Mounted Chamfer: 45° Door Thickness: 16mm (5/8”) to 22mm (3/4”) Side Panel Thickness: 16mm (5/8”) to 22mm (3/4”) Use …
Hafele Miter Flap Cabinet Hinge 1.5mm (1/20”) Wide with 90° Opening AngleRead More
-
Hafele Neuform Cranked Angle Butt Furniture Hinge 40mm (1-5/8”) Height
$17.16 – $18.76Select optionsFeatures: Hafele Neuform Cranked Angle Hinge Material: Brass Finish: Nickel Plated Butt hinge Ideal for Overlay Doors All Holes are Countersunk for Screws Barrel Length: 40mm (1-5/8”) H Door Thickness 15mm – 16mm (9/16” – 5/8”) or 19mm – 20mm (3/4” – 13/16”) Description: The Neuform Cranked Angle Cabinet Hinge by Hafele is ideal for …
Hafele Neuform Cranked Angle Butt Furniture Hinge 40mm (1-5/8”) HeightRead More
-
SKU:LID52W
Lid Opening Flap Stay
$41.21Add to cartDescription "Toy box hinge" – spring style flap stay With a 75° opening angle, the spring action assists in both lifting and closing the box and provides "hold security" in both positions. Springs are easily removed from the hinge. A single spring will accommodate a lid up to 13" in height and approximately 6 lb …
-
SKU:204BR
Lid Support – Right Position
$7.15Add to cartDescription Lid Stay To support lids on trunks, toy boxes, etc. Add style and functionality to your space. Protect your trunks from slamming with this functional piece. Product number 204BR Screw/Nail Included Length 5 1/2 in Finish Brass Material Steel
-
SKU:65131180
Retractable Stay
$14.57Add to cartDescription For upward door OR downward doors Up-opening doors: stays open at 75°, 90° and 100°. Down-opening doors: stays open at 90° only Tension-adjustable via Allen key (included) For wood doors between 300 and 500 mm long Wide range of adjustment: refer to chart for details Minimum required installation depth: 140 mm Lateral space required …
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Free Shiping
On orders over $99

Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.