Category
- Bathroom and Kitchen
- Chemicals
- Daluci
- Fire Protection
- Hardware
- Cabinet Hinges and Slides / Door Hinges and Slides
- Hinges and Accessories
- Opening Systems
- Articulated Fittings for Chests
- Integrated Vertical Opening Systems
- Opening System Accessories
- Miscellaneous Pieces
- Parts and Accessories for Atmos Opening System
- Parts and Accessories for Aventos Systems
- Parts and Accessories for FREElift and Duo Opening Systems
- Parts and Accessories for K12 Opening System
- Parts and Accessories for SLU Opening System
- Parts and Accessories for Wind and Pacta Opening Systems
- Push-to-Open Device
- Suspension Arm with Hinges
- Tambour Doors
- DIY Tambour Door with Parts
- Parts and Accessories (Wood PVC and Metallic)
- Parts and Accessories for PVC and Metallic Tambour Unit
- 90° Corner Track
- Center Stop for Double Horizontal Tambour Doors
- Cover Profile
- Gliders
- Handle Gliders (Non-Locking PVC)
- Handle Profile Gliders (Locking PVC)
- Handle Stopper
- Handles
- Heavy-Duty Roller Extension
- Heavy-Duty Roller System (Rehau C3 System)
- Left and Right Brake
- Rails
- Recessed Spiral Track
- Slat Gliders
- Slowing System (C6 Rehau)
- Tambour Slat
- Tape
- Parts and Accessories for Wood Tambour Unit
- Parts and Accessories for PVC and Metallic Tambour Unit
- Parts and Accessories (Wood PVC and Metallic)
- Ready to Assemble Kits
- DIY Tambour Door with Parts
- Slides and Drawer Box Systems
- Drawer Box Systems
- Parts and Accessories
- Facade Adjusters
- For 908
- For Integra
- For Legrabox
- For Metabox
- For OPTIMIZ-R
- For Tandembox Intivo/Antaro
- For Tandembox Plus
- For Ten
- For Vionaro
- Gallery Tubes and Rods
- Handles for Drawer
- Locking devices
- Miscellaneous
- SERVO-DRIVE
- Slide Brackets and Fixtures
- Soft-Close Accessories
- Space Step System – Parts and Accessories
- Spacers
- Stabilizers
- Tools and Jigs
- Slides
- Space Step
- Closet Storage Hardware
- Connectors & Shelf Supports
- Counter Partition
- Decorative Cabinet Door Hardware
- Cabinet Hardware – Pulls and Knobs
- Decorative Accessories for Furniture Cremones and Bolts
- Decorative Hooks
- Floor Registers and Air Vents
- LB Classic hardware
- Luxury Hardware
- Switch Plates
- Wire Mesh
- Decorative Corbels and Brackets
- Glues, Silicones, and Caulking
- Kitchen and Bathroom Hardware
- Bathroom
- Kitchen
- Base Cabinets
- Corner Cabinet Storage Systems
- Countertops and Accessories
- Drawer Organization
- Functional Accessories
- Hoods Microwave Ovens and Vacuums
- Stainless Steel Accessory System
- Under-Sink Cabinets
- Upper Cabinets Storage Systems
- Wall Unit and Pantry Cabinets Storage Systems
- Wastebins and Recycling Centers
- Wine Cellars
- Light Fixture Hardware
- Office Furniture Parts
- Replacement Furniture Hardware
- Bedroom Solutions
- Bumpers
- Cabinet Levelers
- Casters
- Counter Lift System
- Floor Protection
- Furniture Legs
- Furniture Shelf Pins
- Glides and Metal Levelers
- Latches and Catches
- Locks
- Suspension Hardware
- Suspension Systems
- Swivel Platforms
- Table Hardware
- Table Legs
- Trash Grommets
- TV Lifts and TV Wall Supports
- Wall Shelf Supports
- Screws and Fasteners
- Sliding Door Hardware for Cabinet Doors and Interior Sliding Door Hardware
- Wholesale Door Hardware
- Bathroom Partition Hardware
- Boards
- Door Accessories, Buffers & Stops
- General Hardware
- Hardware for Fences, Decks, and Gardens
- Residential and Commercial Door Hardware
- Back-to-Back Ladder Style Handles
- Ball Catches
- Bumper and Doorstop
- Commercial Door Locksets
- Crémone Bolts and Espagnolettes
- Door Closers
- Door Flush Bolts
- Floor recessed strike for lock or bolt
- Glass Swing Door Handles and Locks
- Handles and Locks for Sliding Doors
- Handles for Garden and Fence Doors and Window
- Handles for Sliding Barn Doors
- Industrial Door Handles
- Industrial Protective Boards
- Push and Pull Handles
- Residential Door Locksets
- Security Hardware
- SOSS UltraLatch
- Surface Bolts
- Tubular Pull Handles
- Security Mirrors
- Staircase Components
- Tubular hardware in stainless steel and brass
- Armrail and Footrest
- Clamps, adaptors, cables, and rods
- Components for On level Clear View Glass Railings
- Frameless Windscreen
- Handrail Brackets
- Handrails and Components
- Juliet Balcony
- Mini Post System for Glass Railing
- Pool Gate Fittings and Glass Fencing Hardware
- Posts, Supports, and Trim
- Standoff Glass Railing Components
- Woodworking Jigs and Jig Templates
- Cabinet Hinges and Slides / Door Hinges and Slides
- Heating
- Home Décor
- Homepage-chemicals
- Homepage-Hardware
- Homepage-heating
- Homepage-Plumbing
- Homepage-tools
- New Items
- Outdoor Equipment
- Plumbing
- Black Malleable Fittings
- Copper/Brass Fittings
- Brass Fittings
- Compression Fittings
- Copper Coils
- Copper Fittings (Domestic)
- 90° Female Drop Ear Elbows
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings With Stop
- Copper Couplings Without Stop
- Copper Female Street Adapters
- Copper Fitting Reducers
- Copper Male Street Adapters
- Copper Reducer Couplings
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- CxCxC Tees
- CxF 90° Elbows
- Copper Fittings (Imported)
- 90° Drop Ear Elbows
- C x C x F Tees
- C x F x C Tees
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings
- Copper Reducer Couplings
- Copper Reducer Fitting Adapters
- Copper Tees
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- Dielectric Unions
- Drains
- Fixtures Drain Connections
- Fixtures Water Connections
- Hangers and Supports
- Hot Water Heaters
- Insulation
- Miscellaneous
- Nipples
- No Hub Fittings
- Couplings
- No Hub Cast Iron Fittings (Domestic)
- No Hub Cast Iron 1/16 Bends
- No Hub Cast Iron 1/4 Bends
- No Hub Cast Iron 1/8 Bends
- No Hub Cast Iron Blind Caps
- No Hub Cast Iron Cleanout Ferrule with Plugs
- No Hub Cast Iron Cleanout Tees
- No Hub Cast Iron Double 1/4 Bends
- No Hub Cast Iron Double Sanitary Tap Tees
- No Hub Cast Iron Double Sanitary Tees
- No Hub Cast Iron Double Wyes
- No Hub Cast Iron P-Traps
- No Hub Cast Iron Sanitary Tap Tees
- No Hub Cast Iron Sanitary Tees
- No Hub Cast Iron Short Reducers
- No Hub Cast Iron Tap 1/4 Bends
- No Hub Cast Iron Upright Wyes
- No Hub Cast Iron Wyes
- No Hub Cast Long Sweeps
- No Hub Cast Short Sweeps
- Pumps
- PVC
- PVC Ball Valves
- PVC Check Valve
- PVC Drain Fittings (DWV)
- PVC DWV 45° Elbows
- PVC DWV 45° Street Elbows
- PVC DWV 90° Elbows
- PVC DWV 90° Street Elbows
- PVC DWV Adjustable P-Trap w/Union
- PVC DWV Caps
- PVC DWV Closet Flanges
- PVC DWV Couplings
- PVC DWV Double Sanitary Tees
- PVC DWV Double Wyes
- PVC DWV Female Adapters
- PVC DWV Fitting Adapters
- PVC DWV Fitting Trap Adapters
- PVC DWV Male Adapters
- PVC DWV P-Traps
- PVC DWV Reducer Couplings
- PVC DWV Sanitary Tees
- PVC DWV Trap Adapters
- PVC DWV Wyes
- PVC Pressure Fittings (Schedule 40)
- Valves
- Power Tools and Accessories
Brand
Category: Decorative Hinges for Glass Door
Decorative Hinges for Glass Door
Showing 1–16 of 21 results
-
Hafele 210 Glass Door Pivot Hinge for All Glass Constructions
$76.16 – $111.82Select optionsFeatures: Hafele 210? Glass Door Pivot Hinge Material: Stainless Steel Finish: Satin Applicable for all glass constructions, inset doors Available in two sizes For maximum 1/2″ (12mm) glass thickness Threaded pin which allows the door to be removed after bonding Installation: For glue fixing (UV glass adhesive bond)Note: Ratio height to width 3:2 must not …
Hafele 210 Glass Door Pivot Hinge for All Glass ConstructionsRead More
-
Hafele Aximat® 300 Inset Glass To Wood Door Cabinet Hinge, 230° Opening Angle, Heavy Duty, with Integrated Catch
$37.14 – $37.92Select optionsHafele Aximat® 300 230° Inset Glass To Wood Door Hinge Material: Zinc Finish: Matt Nickel Maximum Door Opening Angle: 230° For Glass to Wood Doors Sold Per Piece Up to 2000mm (78”) Available for Overlay and Inset Doors Door Overay: 3mm + Knuckle 3mm = 6mm (1/4”) Inset: 3mm (1/8”) Gap Between Door and Side …
-
SKU:HA-361.81.900
Hafele Badge Non-Bore Hinge and Lock System for Lightweight Glass Cabinet Doors
$21.71Add to cartFeatures: Hafele Badge Hinge & Lock System Inset Glass Door Top/Bottom Hinge Set Includes Top and Bottom Hinges Non-Bore Hinge and Lock for Lightweight Glass Doors Material: Die-Cast Zinc Finish: Aluminum Maximum Door Opening Angle: 90° or 180° Screw-Mounted Stylish Design for Inset Doors Edge Mounts to Glass Door with one ABS plastic screw Horizontal …
Hafele Badge Non-Bore Hinge and Lock System for Lightweight Glass Cabinet DoorsRead More
-
SKU:HA-361.49.603
Hafele Clarior Glass Door Cabinet Hinge 40mm (1-5/8”) Wide, 95° Opening Angle
$16.37Add to cartHafele Clarior 95° Glass Door Hinge Material: Die-Cast Zinc Finish: Nickel Plated Matt Maximum Door Opening Angle: 95° For Lightweight Inset Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted Reversible: Can be Used Left or Right For Glass Thicknesses 6mm (1/4”) Maximum Door Weight: 4kg (8.8 lbs.) Maximum Door Size: …
Hafele Clarior Glass Door Cabinet Hinge 40mm (1-5/8”) Wide, 95° Opening AngleRead More
-
Hafele Glass Door Cabinet Hinge 50mm (2”) Height, 180° Opening Angle
$16.33 – $16.88Select optionsFeatures: Hafele 180° Inset Glass Door Hinge Material: Brass Finish: Brass Matt or Nickel Plated Matt Maximum Door Opening Angle: 180° For Lightweight Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted Exposed-Knuckle Hinge with 3mm (1/8”) Horizontal Adjustment for Inset Doors Thumbscrew Secures Glass Reversible: Can be Used Left or …
Hafele Glass Door Cabinet Hinge 50mm (2”) Height, 180° Opening AngleRead More
-
SKU:HA-361.61.000
Hafele Glass Pivot Hinge for Glass/Wood Constructions
$93.34Add to cartFeatures: Hafele Glass Pivot Hinge for Glass/Wood Constructions Material: Stainless Steel Finish: Satin Installation: For glue fixing (UV glass adhesive bonds) For glass thickness: Max. 1/2″ (12mm) Threaded pin in the hinge allows the door to be removed after bondingNote: Ratio height to width 3:2 must not be exceeded Description: This glass pivot hinge by …
Hafele Glass Pivot Hinge for Glass/Wood ConstructionsRead More
-
SKU:HA-361.46.010
Hafele HA-361.46.010 Inset Glass Door Cabinet Hinge for Lightweight Glass Door 38.5mm (1-1/2”) Height, 180° Opening Angle
$10.04Add to cartFeatures: Hafele 180° Inset Glass Door Hinge Material: 304 Grade Stainless Steel Finish: Stainless Steel Maximum Door Opening Angle: 180° For Lightweight Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted For Inset Doors For Glass Thicknesses 4mm (5/32”), 5mm (13/16” ) or 6mm (15/64”) Maximum Door Weight: 4kg (8.8 lbs.) …
-
SKU:HA-361.46.200
Hafele HA-361.46.200 Inset Cabinet Hinge for Lightweight Glass Door 38.5mm (1-1/2”) Height, 180° Opening Angle
$8.72Add to cartFeatures: Hafele 180° Inset Glass Door Hinge Material: Steel Finish: Chrome Plated Polished Maximum Door Opening Angle: 180° For Lightweight Glass Doors Sold Per Piece Requires 7mm (5/64”) Drill Hole in Glass Screw-Mounted For Inset Doors For Glass Thicknesses 4mm (5/32”), 5mm (13/16” ) or 6mm (15/64”) Maximum Door Weight: 4kg (8.8 lbs.) or Per …
-
SKU:HA-361.46.040
Hafele Inset Glass Door Cabinet Hinge 51mm (2”) Height, Corrosion Resistant
$26.80Add to cartFeatures: Hafele Inset Glass Door Hinge For Use in Applications where Resistance to Corrosion is Needed Material: 304 Grade Stainless Steel, Cover: Zinc Finish: Chrome Plated For Mid-Size Glass Doors Sold Per Piece Requires Two 10mm (3/8”) Drill Holes in Glass Screw-Mounted For Inset Doors For Glass Thicknesses 5mm (13/16”) – 8mm (3/8”) Maximum Door …
Hafele Inset Glass Door Cabinet Hinge 51mm (2”) Height, Corrosion ResistantRead More
-
SKU:HA-361.93.240
Hafele Non-Bore All Metal Glass Door Cabinet Hinge with 180° Opening Angle, Pair
$16.29Add to cartFeatures: Hafele 180° All Metal Inset Glass Door Hinge Econo Version of a Non-Bore Glass Door Hinge For Lightweight Glass Doors Material: Die-Cast Zinc Finish: Textured Chrome Plated Matt Maximum Door Opening Angle: 180° With Catch Screw-Mounts to Side of Cabinet Vertical Adjustment with Oblong Holes Maximum Door Weight: 4kg (8.8 lbs.) Per Pair of …
Hafele Non-Bore All Metal Glass Door Cabinet Hinge with 180° Opening Angle, PairRead More
-
SKU:HA-361.46.041
Hafele Overlay Glass Door Cabinet Hinge 51mm (2”) Height, Corrosion Resistant
$34.52Add to cartFeatures: Hafele Overlay Glass Door Hinge For Use in Applications where Resistance to Corrosion is Needed Material: 304 Grade Stainless Steel, Cover: Zinc Finish: Chrome Plated For Mid-Size Glass Doors Sold Per Piece Requires Two 10mm (3/8”) Drill Holes in Glass Screw-Mounted For Half Overlay Doors For Glass Thicknesses 5mm (13/16”) – 8mm (3/8”) Maximum …
Hafele Overlay Glass Door Cabinet Hinge 51mm (2”) Height, Corrosion ResistantRead More
-
Hinge for Door Inserted Into Furniture/Cabinet
$15.67 – $16.51Select optionsDescription Required drilling Hinge for glass/acrylic doors. Load Capacity Max. 4 kg Length 21 mm Width 32 mm Height 34 mm Thickness of Glass 4 to 6 mm Width of Door to Respect Max. 450 mm Height of Door to Respect Max. 700 mm Use Type Glass
-
SKU:754507195
Inset Glass Door Hinge Without Catch
$463.45Add to cartDescription For cabinets or showcases This hinge is the ideal solution to give your glass cabinets and showcases a modern, sleek look. Designed to accommodate multiple thicknesses of glass, this hinge, with a latch, is designed to fit inside cabinets. The vertical and horizontal positions are adjustable during installation to ensure that the cabinets and …
-
Pivot Hinge for Glass Door Recessed in Cabinet/Furniture
$246.47 – $369.97Select optionsDescription require glass milling Can be mounted left or right. Mounting bracket must be installed a minimum of 2 mm from cabinet wall and 20 mm from shelves. Finish Chrome Material Solid Brass Thickness of Glass 6 to 8 mm Use Type Glass
-
SKU:75040170
Recessed Reversible Pivot Hinge for Glass Door Within Furniture/Cabinet
$76.76Add to cartDescription No glass milling is require Pressure-fit. Product number 75040170 Load Capacity Max. 4 kg Finish Satin Nickel Material Solid Brass Width 40 mm Height 21.5 mm Thickness of Glass Max. 8 mm Width of Door to Respect Max. 450 mm Height of Door to Respect Max. 700 mm Use Type Glass Brand Sugatsune/Lamp
-
Snap-In Hinge for Glass Door Recessed Within Furniture/Cabinet
$15.29 – $50.36Select optionsDescription: No drilling Glass door cabinet hinge with a built-in snap that keeps the door closed when shut and requires a handle or pull to open. Finished in a pebbled-grain style. Load Capacity: 7.5 kg Material: Zinc Length: 45 mm Width: 40 mm Height: 30 mm Thickness of Glass: 5 to 6 mm Width of …
Snap-In Hinge for Glass Door Recessed Within Furniture/CabinetRead More
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Free Shiping
On orders over $99

Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.