Category
- Uncategorized
- Bathroom and Kitchen
- Chemicals
- Daluci
- Fire Protection
- Hardware
- Cabinet Hinges and Slides / Door Hinges and Slides
- Hinges and Accessories
- Opening Systems
- Articulated Fittings for Chests
- Integrated Vertical Opening Systems
- Opening System Accessories
- Miscellaneous Pieces
- Parts and Accessories for Atmos Opening System
- Parts and Accessories for Aventos Systems
- Parts and Accessories for FREElift and Duo Opening Systems
- Parts and Accessories for K12 Opening System
- Parts and Accessories for SLU Opening System
- Parts and Accessories for Wind and Pacta Opening Systems
- Push-to-Open Device
- Suspension Arm with Hinges
- Tambour Doors
- DIY Tambour Door with Parts
- Parts and Accessories (Wood PVC and Metallic)
- Parts and Accessories for PVC and Metallic Tambour Unit
- 90° Corner Track
- Center Stop for Double Horizontal Tambour Doors
- Cover Profile
- Gliders
- Handle Gliders (Non-Locking PVC)
- Handle Profile Gliders (Locking PVC)
- Handle Stopper
- Handles
- Heavy-Duty Roller Extension
- Heavy-Duty Roller System (Rehau C3 System)
- Left and Right Brake
- Rails
- Recessed Spiral Track
- Slat Gliders
- Slowing System (C6 Rehau)
- Tambour Slat
- Tape
- Parts and Accessories for Wood Tambour Unit
- Parts and Accessories for PVC and Metallic Tambour Unit
- Parts and Accessories (Wood PVC and Metallic)
- Ready to Assemble Kits
- DIY Tambour Door with Parts
- Slides and Drawer Box Systems
- Drawer Box Systems
- Parts and Accessories
- Facade Adjusters
- For 908
- For Integra
- For Legrabox
- For Metabox
- For OPTIMIZ-R
- For Tandembox Intivo/Antaro
- For Tandembox Plus
- For Ten
- For Vionaro
- Gallery Tubes and Rods
- Handles for Drawer
- Locking devices
- Miscellaneous
- SERVO-DRIVE
- Slide Brackets and Fixtures
- Soft-Close Accessories
- Space Step System – Parts and Accessories
- Spacers
- Stabilizers
- Tools and Jigs
- Slides
- Space Step
- Closet Storage Hardware
- Connectors & Shelf Supports
- Counter Partition
- Decorative Cabinet Door Hardware
- Cabinet Hardware – Pulls and Knobs
- Decorative Accessories for Furniture Cremones and Bolts
- Decorative Hooks
- Floor Registers and Air Vents
- LB Classic hardware
- Luxury Hardware
- Switch Plates
- Wire Mesh
- Decorative Corbels and Brackets
- Glues, Silicones, and Caulking
- Kitchen and Bathroom Hardware
- Bathroom
- Kitchen
- Base Cabinets
- Corner Cabinet Storage Systems
- Countertops and Accessories
- Drawer Organization
- Functional Accessories
- Hoods Microwave Ovens and Vacuums
- Stainless Steel Accessory System
- Under-Sink Cabinets
- Upper Cabinets Storage Systems
- Wall Unit and Pantry Cabinets Storage Systems
- Wastebins and Recycling Centers
- Wine Cellars
- Light Fixture Hardware
- Office Furniture Parts
- Replacement Furniture Hardware
- Bedroom Solutions
- Bumpers
- Cabinet Levelers
- Casters
- Counter Lift System
- Floor Protection
- Furniture Legs
- Furniture Shelf Pins
- Glides and Metal Levelers
- Latches and Catches
- Locks
- Suspension Hardware
- Suspension Systems
- Swivel Platforms
- Table Hardware
- Table Legs
- Trash Grommets
- TV Lifts and TV Wall Supports
- Wall Shelf Supports
- Screws and Fasteners
- Sliding Door Hardware for Cabinet Doors and Interior Sliding Door Hardware
- Wholesale Door Hardware
- Bathroom Partition Hardware
- Boards
- Door Accessories, Buffers & Stops
- General Hardware
- Hardware for Fences, Decks, and Gardens
- Residential and Commercial Door Hardware
- Back-to-Back Ladder Style Handles
- Ball Catches
- Bumper and Doorstop
- Commercial Door Locksets
- Crémone Bolts and Espagnolettes
- Door Closers
- Door Flush Bolts
- Floor recessed strike for lock or bolt
- Glass Swing Door Handles and Locks
- Handles and Locks for Sliding Doors
- Handles for Garden and Fence Doors and Window
- Handles for Sliding Barn Doors
- Industrial Door Handles
- Industrial Protective Boards
- Push and Pull Handles
- Residential Door Locksets
- Security Hardware
- SOSS UltraLatch
- Surface Bolts
- Tubular Pull Handles
- Security Mirrors
- Staircase Components
- Tubular hardware in stainless steel and brass
- Armrail and Footrest
- Clamps, adaptors, cables, and rods
- Components for On level Clear View Glass Railings
- Frameless Windscreen
- Handrail Brackets
- Handrails and Components
- Juliet Balcony
- Mini Post System for Glass Railing
- Pool Gate Fittings and Glass Fencing Hardware
- Posts, Supports, and Trim
- Standoff Glass Railing Components
- Woodworking Jigs and Jig Templates
- Cabinet Hinges and Slides / Door Hinges and Slides
- Heating
- Home Décor
- Homepage-chemicals
- Homepage-Hardware
- Homepage-heating
- Homepage-Plumbing
- Homepage-tools
- New In Items
- Outdoor Equipment
- Plumbing
- Black Malleable Fittings
- Copper/Brass Fittings
- Brass Fittings
- Compression Fittings
- Copper Coils
- Copper Fittings (Domestic)
- 90° Female Drop Ear Elbows
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings With Stop
- Copper Couplings Without Stop
- Copper Female Street Adapters
- Copper Fitting Reducers
- Copper Male Street Adapters
- Copper Reducer Couplings
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- CxCxC Tees
- CxF 90° Elbows
- Copper Fittings (Imported)
- 90° Drop Ear Elbows
- C x C x F Tees
- C x F x C Tees
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings
- Copper Reducer Couplings
- Copper Reducer Fitting Adapters
- Copper Tees
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- Dielectric Unions
- Drains
- Fixtures Drain Connections
- Fixtures Water Connections
- Hangers and Supports
- Hot Water Heaters
- Insulation
- Miscellaneous
- Nipples
- No Hub Fittings
- Couplings
- No Hub Cast Iron Fittings (Domestic)
- No Hub Cast Iron 1/16 Bends
- No Hub Cast Iron 1/4 Bends
- No Hub Cast Iron 1/8 Bends
- No Hub Cast Iron Blind Caps
- No Hub Cast Iron Cleanout Ferrule with Plugs
- No Hub Cast Iron Cleanout Tees
- No Hub Cast Iron Double 1/4 Bends
- No Hub Cast Iron Double Sanitary Tap Tees
- No Hub Cast Iron Double Sanitary Tees
- No Hub Cast Iron Double Wyes
- No Hub Cast Iron P-Traps
- No Hub Cast Iron Sanitary Tap Tees
- No Hub Cast Iron Sanitary Tees
- No Hub Cast Iron Short Reducers
- No Hub Cast Iron Tap 1/4 Bends
- No Hub Cast Iron Upright Wyes
- No Hub Cast Iron Wyes
- No Hub Cast Long Sweeps
- No Hub Cast Short Sweeps
- Pumps
- PVC
- PVC Ball Valves
- PVC Check Valve
- PVC Drain Fittings (DWV)
- PVC DWV 45° Elbows
- PVC DWV 45° Street Elbows
- PVC DWV 90° Elbows
- PVC DWV 90° Street Elbows
- PVC DWV Adjustable P-Trap w/Union
- PVC DWV Caps
- PVC DWV Closet Flanges
- PVC DWV Couplings
- PVC DWV Double Sanitary Tees
- PVC DWV Double Wyes
- PVC DWV Female Adapters
- PVC DWV Fitting Adapters
- PVC DWV Fitting Trap Adapters
- PVC DWV Male Adapters
- PVC DWV P-Traps
- PVC DWV Reducer Couplings
- PVC DWV Sanitary Tees
- PVC DWV Trap Adapters
- PVC DWV Wyes
- PVC Pressure Fittings (Schedule 40)
- Valves
- Power Tools and Accessories
Brand
Category: CLIP and CLIP top Mounting Plates
CLIP and CLIP top Mounting Plates
Showing 1–16 of 21 results
-
Cam Mounting Plate
$1.32 – $2.61Select optionsDescription: This Blum alloy mounting plate for CLIP and CLIP top hinges allows you to adjust the hinge positioning with ease. The cam adjustment makes the hinge installation easy and precise. The adjustment screw head is of the Pozi type. Type of height adjustment: Cam Mounting Material: Steel Finish: Nickel Fixing Type: Screw-On Technical documentation click …
-
Cam Mounting Plate
$1.32 – $1.55Select optionsDescription: Mounts with system screws (6611152G). Cam height adjustment /- 2 mm. *Note: Add an additional wood screw if used with wide-angle hinges. Type: Cam Mounting Material: Steel Finish: Nickel Screw/Nail: EURO Screw Fixing Type: Screw-On Technical Documentation click here
-
CLIP Wing Mounting Plates
$3.47 – $4.74Select optionsDescription: These newly designed mounting plates can be used on frameless and framed cabinet applications. Five plates come in new heights that help avoid blocking out in inset applications by matching the recess behind the face frame. New mounting plate heights with cam height adjustment Steel, nickel-plated with zinc adapter Attached with #7 x 5/8″ …
-
EXPANDO Cam Mounting Plate
$1.56 – $2.63Select optionsDescription Mounts with pre-mounted screws and EXPANDO dowels. Cam height adjustment /- 2 mm. *Note: Add an additional wood screw if used with wide-angle hinges. Type: Cam Mounting Material: Steel Finish: Nickel Fixing Type: Knock-In with Insertion Ram Only Milling Diameter: 5 mm Technical documentation click here Technical documentation click here Technical documentation click here …
-
SKU:174E610Z180
EXPANDO Plate for Twin Application (Height 0 mm)
$0.95Read moreDescription Mounts with pre-mounted screws and EXPANDO dowels. Height adjustment of plus or minus 2 mm. *Note: Add an additional wood screw if used with wide-angle hinges. – For twin application. Product number 174E610Z180 Type One-Piece Wing Height 0 mm Material Steel Finish Nickel Fixing Type Knock-In with Insertion Ram Only
-
Face Frame Adapter Plate, Center Mount
$1.58 – $2.93Select optionsDescription: Mounts with wood screws #7 x 3/4″. Height adjustment of plus or minus 2 mm. Use of PlateMate 655030 is recommended. Type: Face Frame – Center Mount Material: Die-Cast Zinc Finish: Nickel Fixing Type: Screw-On Technical Documentation click here
-
Face Frame Adapter Plate, Off-Center – Assembly Type: Mounts with Wood Screws, #7 x 3/4″
$1.38 – $1.90Select optionsDescription: Height adjustment of /- 2 mm. Use of PlateMate 655030 is recommended. Type: Face Frame – Off-Center Mount Material: Die-Cast Zinc Finish: Nickel Screw/Nail: Wood Fixing Type: Screw-On Packaging Specifications: Not Applicable Technical documentation click here
-
Face Frame Cam Adapter Plate, Center Mount
$1.99 – $2.46Select optionsDescription: Mounts with wood screws #7 x 3/4″. Face frame cam adapter plate, off-center mount (12.5 mm). Cam height adjustment of plus or minus 2 mm. Type of height adjustment: Inset Face Frame Cam Material: Die-Cast Zinc Finish: Nickel Fixing Type: Screw-On Technical documentation click here Requires the following products: Zinc-Plated Wood Screw, Flat Head, …
-
Horizontal Cam Mounting Plate
$1.57 – $2.11Select optionsDescription: Assembly using chipboard screws Ø 3.5 mm With cam height adjustment ± 2 mm Type: Cam-In-Line Mounting Height: 0 mm Material: Steel Finish: Nickel Important information Recommended screw length of 17 mm for the screw-on version. * Fix with additional screw if used with wide angle hinges. Technical documentation click here
-
SKU:175H503021180
Inset Face Frame Cam Adapter Plate (Height 9 mm)
$4.25Read moreDescription Mounts with truss head screws #8 x 3/4". Use with half-cranked hinges only. Cam height adjustment of plus or minus 2 mm. 170° hinges not recommended. Product number 175H503021180 Type Inset Face Frame Cam Height 9 mm Material Die-Cast Zinc Finish Nickel Fixing Type Screw-On
-
SKU:174E610180
One-Piece EXPANDO Mounting Plate
$1.15Read moreDescription: Mounts using pre-mounted screws with EXPANDO dowels. Height adjustment /- 2 mm. *Note: Add an additional wood screw if used with wide-angle hinges. Type: One-Piece Wing Height: 0 mm Material: Steel Finish: Nickel Fixing Type: Knock-In with Insertion Ram Only Technical documentation click here
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Free Shiping
On orders over $99

Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.