Category
- Uncategorized
- Bathroom and Kitchen
- Chemicals
- Daluci
- Fire Protection
- Hardware
- Cabinet Hinges and Slides / Door Hinges and Slides
- Hinges and Accessories
- Opening Systems
- Articulated Fittings for Chests
- Integrated Vertical Opening Systems
- Opening System Accessories
- Miscellaneous Pieces
- Parts and Accessories for Atmos Opening System
- Parts and Accessories for Aventos Systems
- Parts and Accessories for FREElift and Duo Opening Systems
- Parts and Accessories for K12 Opening System
- Parts and Accessories for SLU Opening System
- Parts and Accessories for Wind and Pacta Opening Systems
- Push-to-Open Device
- Suspension Arm with Hinges
- Tambour Doors
- DIY Tambour Door with Parts
- Parts and Accessories (Wood PVC and Metallic)
- Parts and Accessories for PVC and Metallic Tambour Unit
- 90° Corner Track
- Center Stop for Double Horizontal Tambour Doors
- Cover Profile
- Gliders
- Handle Gliders (Non-Locking PVC)
- Handle Profile Gliders (Locking PVC)
- Handle Stopper
- Handles
- Heavy-Duty Roller Extension
- Heavy-Duty Roller System (Rehau C3 System)
- Left and Right Brake
- Rails
- Recessed Spiral Track
- Slat Gliders
- Slowing System (C6 Rehau)
- Tambour Slat
- Tape
- Parts and Accessories for Wood Tambour Unit
- Parts and Accessories for PVC and Metallic Tambour Unit
- Parts and Accessories (Wood PVC and Metallic)
- Ready to Assemble Kits
- DIY Tambour Door with Parts
- Slides and Drawer Box Systems
- Drawer Box Systems
- Parts and Accessories
- Facade Adjusters
- For 908
- For Integra
- For Legrabox
- For Metabox
- For OPTIMIZ-R
- For Tandembox Intivo/Antaro
- For Tandembox Plus
- For Ten
- For Vionaro
- Gallery Tubes and Rods
- Handles for Drawer
- Locking devices
- Miscellaneous
- SERVO-DRIVE
- Slide Brackets and Fixtures
- Soft-Close Accessories
- Space Step System – Parts and Accessories
- Spacers
- Stabilizers
- Tools and Jigs
- Slides
- Space Step
- Closet Storage Hardware
- Connectors & Shelf Supports
- Counter Partition
- Decorative Cabinet Door Hardware
- Cabinet Hardware – Pulls and Knobs
- Decorative Accessories for Furniture Cremones and Bolts
- Decorative Hooks
- Floor Registers and Air Vents
- LB Classic hardware
- Luxury Hardware
- Switch Plates
- Wire Mesh
- Decorative Corbels and Brackets
- Glues, Silicones, and Caulking
- Kitchen and Bathroom Hardware
- Bathroom
- Kitchen
- Base Cabinets
- Corner Cabinet Storage Systems
- Countertops and Accessories
- Drawer Organization
- Functional Accessories
- Hoods Microwave Ovens and Vacuums
- Stainless Steel Accessory System
- Under-Sink Cabinets
- Upper Cabinets Storage Systems
- Wall Unit and Pantry Cabinets Storage Systems
- Wastebins and Recycling Centers
- Wine Cellars
- Light Fixture Hardware
- Office Furniture Parts
- Replacement Furniture Hardware
- Bedroom Solutions
- Bumpers
- Cabinet Levelers
- Casters
- Counter Lift System
- Floor Protection
- Furniture Legs
- Furniture Shelf Pins
- Glides and Metal Levelers
- Latches and Catches
- Locks
- Suspension Hardware
- Suspension Systems
- Swivel Platforms
- Table Hardware
- Table Legs
- Trash Grommets
- TV Lifts and TV Wall Supports
- Wall Shelf Supports
- Screws and Fasteners
- Sliding Door Hardware for Cabinet Doors and Interior Sliding Door Hardware
- Wholesale Door Hardware
- Bathroom Partition Hardware
- Boards
- Door Accessories, Buffers & Stops
- General Hardware
- Hardware for Fences, Decks, and Gardens
- Residential and Commercial Door Hardware
- Back-to-Back Ladder Style Handles
- Ball Catches
- Bumper and Doorstop
- Commercial Door Locksets
- Crémone Bolts and Espagnolettes
- Door Closers
- Door Flush Bolts
- Floor recessed strike for lock or bolt
- Glass Swing Door Handles and Locks
- Handles and Locks for Sliding Doors
- Handles for Garden and Fence Doors and Window
- Handles for Sliding Barn Doors
- Industrial Door Handles
- Industrial Protective Boards
- Push and Pull Handles
- Residential Door Locksets
- Security Hardware
- SOSS UltraLatch
- Surface Bolts
- Tubular Pull Handles
- Security Mirrors
- Staircase Components
- Tubular hardware in stainless steel and brass
- Armrail and Footrest
- Clamps, adaptors, cables, and rods
- Components for On level Clear View Glass Railings
- Frameless Windscreen
- Handrail Brackets
- Handrails and Components
- Juliet Balcony
- Mini Post System for Glass Railing
- Pool Gate Fittings and Glass Fencing Hardware
- Posts, Supports, and Trim
- Standoff Glass Railing Components
- Woodworking Jigs and Jig Templates
- Cabinet Hinges and Slides / Door Hinges and Slides
- Heating
- Home Décor
- Homepage-chemicals
- Homepage-Hardware
- Homepage-heating
- Homepage-Plumbing
- Homepage-tools
- New Items
- Outdoor Equipment
- Plumbing
- Black Malleable Fittings
- Copper/Brass Fittings
- Brass and Copper Fittings
- 90° Drop Ear Elbows
- C x C x F Tees
- C x F x C Tees
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings
- Copper Reducer Couplings
- Copper Reducer Fitting Adapters
- Copper Tees
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- Dielectric Unions
- Brass Fittings
- Compression Fittings
- Copper Coils
- Copper Fittings (Domestic)
- 90° Female Drop Ear Elbows
- Copper 45° Elbows
- Copper 45° Street Elbows
- Copper 90° Elbows
- Copper 90° Street Elbows
- Copper Caps
- Copper Couplings With Stop
- Copper Couplings Without Stop
- Copper Female Street Adapters
- Copper Fitting Reducers
- Copper Male Street Adapters
- Copper Reducer Couplings
- Copper Unions
- Copper x Female Adapters
- Copper x Male Adapters
- CxCxC Tees
- CxF 90° Elbows
- Brass and Copper Fittings
- Drains
- Fixtures Drain Connections
- Fixtures Water Connections
- Hangers and Supports
- Hot Water Heaters
- Insulation
- Miscellaneous
- Nipples
- No Hub Fittings
- Couplings
- No Hub Cast Iron Fittings (Domestic)
- No Hub Cast Iron 1/16 Bends
- No Hub Cast Iron 1/4 Bends
- No Hub Cast Iron 1/8 Bends
- No Hub Cast Iron Blind Caps
- No Hub Cast Iron Cleanout Ferrule with Plugs
- No Hub Cast Iron Cleanout Tees
- No Hub Cast Iron Double 1/4 Bends
- No Hub Cast Iron Double Sanitary Tap Tees
- No Hub Cast Iron Double Sanitary Tees
- No Hub Cast Iron Double Wyes
- No Hub Cast Iron P-Traps
- No Hub Cast Iron Sanitary Tap Tees
- No Hub Cast Iron Sanitary Tees
- No Hub Cast Iron Short Reducers
- No Hub Cast Iron Tap 1/4 Bends
- No Hub Cast Iron Upright Wyes
- No Hub Cast Iron Wyes
- No Hub Cast Long Sweeps
- No Hub Cast Short Sweeps
- Pumps
- PVC
- PVC Ball Valves
- PVC Check Valve
- PVC Drain Fittings (DWV)
- PVC DWV 45° Elbows
- PVC DWV 45° Street Elbows
- PVC DWV 90° Elbows
- PVC DWV 90° Street Elbows
- PVC DWV Adjustable P-Trap w/Union
- PVC DWV Caps
- PVC DWV Closet Flanges
- PVC DWV Couplings
- PVC DWV Double Sanitary Tees
- PVC DWV Double Wyes
- PVC DWV Female Adapters
- PVC DWV Fitting Adapters
- PVC DWV Fitting Trap Adapters
- PVC DWV Male Adapters
- PVC DWV P-Traps
- PVC DWV Reducer Couplings
- PVC DWV Sanitary Tees
- PVC DWV Trap Adapters
- PVC DWV Wyes
- PVC Pressure Fittings (Schedule 40)
- Valves
- Power Tools and Accessories
Brand
Size
Category: Shelf Brackets
Shelf Brackets
Showing 1–16 of 33 results
-
Concealed Black Flat Bracket – Steel
$138.79 – $199.46Select optionsDescription Looking for a bracket that is completely concealable? Look no further. The concealed fat bracket provides superior strength and can be completely hidden in your counter-tops, cabinets, floating shelves, vanities, or islands.
-
SKU:EC081210
Decorative Eclipse Support Bracket – 8″ x 12″
$274.54Add to cartDescription Rakks Eclipse Brackets can support counters or shelves up to 12" and 18" deep. This attractive low-profile design is easy to install with no visible hardware. Machined aluminum ends provide a smooth and near-seamless termination. Eclipse brackets can support loads of up to 200 pounds per pair. If your cantilevered counter has already been …
-
Extra-Heavy-Duty Countertop Bracket
$88.70 – $105.45Select optionsDescription Counter support brackets provide a low-cost and easy-to-install alternative to full-height laminated panel supports. Construction: TIG (tungsten inert gas) welded along both 45° mitered sides and across the back. All sharp edges ground and deburred. Hardware: 5/16" holes accept #14 pan head screws. Installation: 48" maximum spacing into studs or blocking, or as specified …
-
Folding Support
$58.99 – $86.15Select optionsDescription These sturdy folding L-brackets allow you to create a work surface that can be quickly folded way when no longer needed. The bracket’s convenient one-hand release mechanism makes the bracket easy to open, close, or adjust without the danger of getting hands caught in a folding crossbar. – Brackets can be mounted to any …
-
Hafele Clamping Shelf Brackets for Solid or Glass Shelves, Shelf Thickness 3/16″ – 1-3/16″ (4-30mm)
$23.76 – $50.62Select optionsFeatures: Clamping Shelf Brackets for 4- 30mm H: 3/16″ – 1-3/16″ 2 required per shelf Zinc alloy with intermediate layers of plastic, black finish Load capacity: Up to 66 lbs. each pair Vertically adjustable Max shelf depth 6″ Available in Polished Chrome Plated, Stainless Steel and Silver Aluminum Description: Hafele 4-30mm Clamping Shelf Brackets are …
-
Hafele Clamping Shelf Brackets for Solid or Glass Shelves, Shelf Thickness 3/16″- 13/16″H (4-20mm)
$12.92 – $28.41Select optionsFeatures: Clamping Shelf Brackets for 4 – 20mm H: 3/16″ – 13/16″ 2 required per shelf Zinc alloy with intermediate layers of plastic, black finish Load capacity: Up to 18 lbs. each pair Vertically adjustable Max shelf depth 6″ Available in Polished Chrome Plated, Stainless Steel and Silver Aluminum Description: Hafele 4-30mm H Clamping Shelf …
-
Hafele Countertop and Work Surface Brackets 12″, 18″, 24″, 28″ Depth
$34.66 – $140.03Select optionsFeatures: Load capacity: 1000 lbs. per pair when mounted on 16″ centers Sold individually 3/4″ x 1-1/2″ notching system for fast and easy alignment after installing a level wall cleat Two different sized arm lengths, which allow for one brace to be used for two different sized countertops Heavy-duty folded steel design for strength Two …
Hafele Countertop and Work Surface Brackets 12″, 18″, 24″, 28″ DepthRead More
-
Heavy-Duty Flush Mount Bracket
$122.90 – $168.71Select optionsDescription These brackets use an L-shaped vertical leg flange that screws to the right side of the bare stud. After installation of the brackets, drywall is installed around the bracket to hide the vertical support. Only the shelf bracket is visible. Construction: TIG (tungsten inert gas) welded along both 45° mitered sides and across the …
-
K-300 Kolossus Countertop Bracket
$32.38 – $97.28Select optionsNearly invisible, gives your countertop the appearance of floating Easy to install and affordable No special hardware or tools required Screw holes are countersunk into the brace for a flush installation Material: Steel Color/Finish: Black Width – Overall Dimension: 3 1/2 in Screw/Nail: #12 (Not Included) ADVANTAGES AND BENEFITS – Powder-coated – Countersunk screw holes …
-
K-R650 Kolossus Heavy-Duty Aluminum Brackets
$68.85 – $134.06Select optionsDescription Aluminum Countertop Bracket The heavy-duty aluminum brackets are lightweight but very strong. Ideal for countertops and shelves. TECHNICAL SPECIFICATIONS Product number: 47181810 Maximum Load Capacity per Shelf: 450 lb Material: 6063-T6 Extruded Aluminum Brand: Richelieu Screw/Nail: #14 Pan Head (Not Included)
Best offers
Join Risk Free
30 days refund
100% Safe
Secure Shopping
24x7 Support
Online 24 hours
Best Offers
Grab Now
Free Shiping
On orders over $99

Craft Supply is a diverse wholesale distributor of hardware and fitting systems, plumbing supplies, heating supplies, valves and fittings, waterworks and drainage, faucets and fixtures, tools and other equipment as well as many other specialty products within the industry.