Category: Keyed Lock Parts and Accessories CompX

Keyed Lock Parts and Accessories CompX

Showing all 13 results

  • SKU:LOCC70082C

    Cam for Disc Tumber Lock

    $4.23

    Description – different sizes and styles to meet requirments

    Add to cart
  • SKU:LOCHEXNUT

    Cam Lock with Removable Disc Tumbler Core – Piece: Hex Nut

    $0.48

    Over 150 different keyed alike options with master keying. Fabricators often request that we provide the same key for particular rooms or for specific items. This allows the fabricator the ability to build different furniture pieces at the factory with pre-installed lock cores and, upon delivery provide the capability to key-alike furniture pieces for specific …

    Cam Lock with Removable Disc Tumbler Core – Piece: Hex NutRead More

    Add to cart
  • SKU:LOCSPUR

    Cam Lock with Removable Disc Tumbler Core – Piece: Spur Washer

    $0.97

    Over 150 different keyed alike options with master keying. Fabricators often request that we provide the same key for particular rooms or for specific items. This allows the fabricator the ability to build different furniture pieces at the factory with pre-installed lock cores and, upon delivery provide the capability to key-alike furniture pieces for specific …

    Cam Lock with Removable Disc Tumbler Core – Piece: Spur WasherRead More

    Add to cart
  • Double Formed Cams

    $5.01

    Description Selection of cams that allow adaptation of disc tumbler cylinder cam locks to meet nearly every application need. Double formed cams can be reversed when required.

    Select options
  • SKU:LOCC20033

    Flat Strike with Rounded Ends

    $5.71

    Description Flat strike with rounded ends, 3/4 in x 7/32 in (19.05 mm x 5.56 mm) bolt hole. Overall dimensions: 1 15/16 in x 3/8 in (49.21 mm x 9.53 mm).

    Add to cart
  • SKU:LOC8799MK

    Master Key – D8799

    $9.53

    Description Master key for E41A lock

    Add to cart
  • SKU:LOC20162C

    Mounting Plate for Cylinder Cam Locks

    $5.20

    Description Mounting plate for cylinder cam locks, screw mounted. Used where spur washer will not embed into hard surface. Overall dimensions: 2 3/16 in x 1 1/4 in (55.56 mm x 31.75 mm)

    Add to cart
  • SKU:LOCM5060KEY

    Remove Plug Control Key E041AC

    $7.30

    Description

    Add to cart
  • Rosette – C2017

    $6.86$6.98

    Description These 7/8 in (22.23 mm) diameter rosettes can be used to cover ragged edges around bored mounting holes.

    Select options
  • SKU:LOCC7017

    Self-Locking SlamCAM Kit

    $21.16

    Description SlamCAM, a spring-loaded latch, along with the self-locking component, converts cam locks (LOC8051-LOC8073) into self-locking locks. Replacing steel cams with SlamCAM eliminates steel cams that crash into furniture or strikes while in the latched position. Bent cams can cause locks to not secure properly, or not secure at all. The self-locking feature uses spring …

    Self-Locking SlamCAM KitRead More

    Add to cart
  • Straight Cams

    $4.48$5.00

    Selection of cams that allow adaptation of disc tumbler cylinder cam locks to meet nearly every application need. Material: Steel Piece: Regular Cam

    Select options
  • Strike Plate

    $3.56$3.61

    Description Strike plate for cabinet door or drawer lock.

    Select options
  • SKU:LOCC201714A

    Trim Ring

    $4.98

    Description 7/8 in (22.23 mm) diameter trim ring to cover ragged edges around bored mounting holes.

    Add to cart