1200-SSB Signat... 
Description
- 100% glue coverage creates superior holding strength
- Eliminates clean up time on your product during and after assembly
Material: Kiln-dried hardwood
How to use a Pre-glued Dowel Pin
- Simply replace your glue with water
- Fill approximately 1/3 of the hole with water and insert dowel
- A spray mist bottle can also be used by holding the nozzle next to the hole, and spraying 1 or 2 times before you insert the dowel
Related products
-
Remove from Wishlist
SKU:HA-271.61.306
Hafele Keyhole Fitting, Bed Connector
$1.14Read moreFinish: Unfinished Extremely strong and invisible Dimensions of recesses should be taken directly from the fittings Use #6 flat head screw to install plate & Use #10 pan head screw for keyhole Components can be assembled or disassembled without tools Profiled plates for machined-recess installation Can also be inserted into a groove Features: Concealed hanger …
-
Remove from Wishlist
-
Remove from Wishlist
SKU:HA-271.03.930
Hafele Bed Fitting, Noval K
$10.41Add to cartFinish: Silver, chromated Features: With pointed teeth and cranked hook component Mounting: Screw-mounted Material: Steel 1 set is required to connect 4 corners Supplied with 4 female parts 2 left hooks 2 right hooks
-
Remove from Wishlist
Hafele Bed Connecting Bracket Fitting, 1 Set (4 Lefts and 4 Rights)
$12.47 – $18.30Select options This product has multiple variants. The options may be chosen on the product pageBed Connecting Bracket Fitting Left or Right use Includes 1 Set – 4 Left Hand and 4 Right Hand parts Screw-Mounted Hook-Type Fastening Sturdy Design Available in Multiple Sizes Unfinished Steel Dimensions: 95mm (3-3/4″) or 145mm (5-11/16″) H
-
Remove from Wishlist
Hafele Countersunk Connector, Häfele Confirmat, countersunk head, for drill hole Ø 5 mm, PZ3
$0.05 – $0.18Select options This product has multiple variants. The options may be chosen on the product pageExtremely strong With tip for easy insertion into blind hole Countersink is not necessary as the ribs countersink hole Head diameter: 10 mm Drill hole diameter: 5 mm Drive: PZ3 cross slot Material: Steel
-
Remove from Wishlist
SKU:HA-267.22.900
Hafele Two-Piece Connector, Press-Fit, Permanent, Steel
$3.70Add to cartColor: Brown Features: 2-piece dowel connector Material: Steel dowel headed screw, polyamid sleeve Supplied with Screws Sleeves 10 centering pins
-
Remove from Wishlist
SKU:HA-558.12.943
Hafele Mounting Plate, Bed Connector
$1.99Add to cartFeatures: With 2 horizontal slots and additional screw holes Mounting: Screw-mounted Use #8 pan head screw Material: Steel Finish: Nickel plated
-
Remove from Wishlist
SKU:HA-261.30.790
Hafele Dovetail Sleeve, for Screw Mounting
$0.97Add to cartFinish/color: Gray For use as rear panel connector in small furniture Easy installation without tools No additional drill hole is needed Suitable for concealed applications as the installation is carried out from the rear side of the furniture Application: For fixing the rear panel in small furniture for use as vibration protection in wooden drawers …
-
Remove from Wishlist
SKU:HA-260.12.706
Hafele Rear Panel Bracket, for 32 mm Series Holes
$1.43Add to cartColor: White Application: For 32 mm series holes Mounting: Press fit Hole diameter: 5 mm Material: Plastic Use #6 pan head screw
-
Remove from Wishlist
