Free Shipping on Orders over 99$

Hafele Press-Fit Type Use Shelf Support, Galvanized Steel with Thread 120mm (4-23/32”) D

$6.99

SKU: HA-283.32.014 Category:

Features:

  • Press-Fit shelf supports
  • For invisible fastening of shelves with a 19 mm wood thickness or greater in living room, kitchen, bath and bedroom areas
  • Adjustment without tools by turning the plastic sleeve
  • Hexagonal end on the shelf support permits installation with 1/4″ using a cordless drill or a 6mm open end or box-end wrench
  • Can be installed directly into masonry walls or woodwork
  • To make adjustments possible, the insertion hole must be laterally elongated, with a slot drilling machine or a chain mill
  • Adjust height and level, set the shelf on the shelf supports mounted in the wall and then adjust by turning the plastic sleeves
    Press-Fit Type Use Includes:
    Support bolt with wood thread
    2 Plastic sleeves, pre-mounted
    Washer
    Fischer structural wall anchor S 8H 80 R

Description:

The Press-Fit Type Use Shelf Support by Hafele is for invisible fastening of shelves with a 19 mm wood thickness or greater in living room, kitchen, bath and bedroom areas. Adjustable without tools by turning the plastic sleeve. Adjust height and level, set the shelf on the shelf supports mounted in the wall and then adjust by turning the plastic sleeves. The Hexagonal end on the shelf support permits installation with 1/4″ using a cordless drill or a 6mm open end or box-end wrench. Can be installed directly into masonry walls or woodwork. To make adjustments possible, the insertion hole must be laterally elongated, with a slot drilling machine or a chain mill.

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

HA-283.32.014: 120mm (4-23/32”) D

Weight 0.13 lbs
Dimensions 7.87 × 0.78 × 0.78 cm
Brand