Hafele Porta 100 GU Fitting Set, Sliding Door Hardware, Top Hung System, for 1 and 2 Sliding Glass Doors up to 220 lbs. each, with running gear concealed…

SKU: HA-941.00.007-GU


Out of stock


  • Porta 100 GU Fitting Set – Sliding Door Hardware, Top Hung System
  • Complete Fitting Set, for a single sliding door without running track
  • Wall mounting
  • Door Hardware System requires an upper track (See Required Upper Track)
  • For 1 and 2 sliding glass doors
  • Running gear concealed behind design fascia
  • For Glass Doors up to 220 lbs. (100kg) each
  • For glass thickness: 8 – 12.7 mm (5/16″ – 1/2″)
  • For 2 bi-parting and bypassing sliding doors, order 2 sets
  • Smooth quiet operation
  • Maintenance-free
  • Glass mounted with well-tried clamping shoe technology
  • Continuous height adjustment
  • Continuous bottom guide adjustment for different glass thicknesses
  • Rattle-free bottom guide
  • Adjustable stopper retaining force
  • Simple installation
  • No glass cut-outs required
  • Vertical adjustment without removing the glass door
  • Area of application: All-glass doors, private living areas, private and public office areas, projects, individual interior furnishing
  • Larger tracks are available for special order – please call 1.800.667.8721 to order
  • Note: When using 2 sliding doors on the same track, please make sure that glass panels do not collide. Please use a lower guide channel with a door stopper or use protective edge trim.
  • Set includes: 2x double roller running gear; 2x suspension bolt; 2x M8 set nut; 2x clamp shoe – adjustable from 6 – 12.7 mm (1/4″ – 1/2″); 1x track stopper, with adjustable retention spring; 1x track stopper; 1x floor guide – adjustable from 6 – 12.7 mm (1/4″ – 1/2″); 1x buffer
  • Clip-on Panel Fascia, to clamping shoe, Aluminum – 2.5 m (8′ 2-7/16″) length, 56mm W x 10mm D (2-13/64″ x 25/64″) – has to be cut to size
  • End Caps, to Clip-on Panel Fascia to Upper Track and Clamp Shoe
    • See Dimensions for Order Requirements; Option A with no glass cut-outs required, need 1 set; Option B & C with glass cut-outs required, need 2 sets
  • Soft Closing Mechanism – for Door Weight 135-220lbs. (61-100kg )
  • Cover Cap – for Notched Service Access in Track
  • Drill Jig – for Notched Service Access in Track


This Sliding Door Hardware Porta 100 GU Fitting Set by Hafele is designed for one top running glass door weighing up to 220 lbs. (100kg). The glass door is held at the top by two glass clamp shoes that are connected to the running gear, and then the running equipment moves inside a combination running track that is suitable for wall mounting. A clip-on panel, sold separately, made from aluminium (or your own wood piece) can be fitted to the track width for a finished look.


(W = side to side) (D = front to back) (H = top to bottom)

Weight 1.68 lbs
Dimensions 7.87 × 4.72 × 2.36 cm