Hafele Porta 100 GF Fitting Set, Sliding Door Hardware, Top Hung System, for 1 and 2 Sliding Glass Doors up to 220 lbs. each, with combination sliding and…

SKU: HA-941.00.007-GF

$490.56

Out of stock

Features:

  • Porta 100 GF Fitting Set – Sliding Door Hardware, Top Hung System
  • Complete Fitting Set, for a combination sliding and fixed glass door without running track
  • Wall or ceiling mounting
  • Door Hardware System requires an upper track (See Required Upper Track)
  • For 1 and 2 glass doors
  • For Glass Doors up to 220 lbs. (100kg) each
  • For glass thickness: 8 – 12.7 mm (5/16″ – 1/2″) – 12.7 mm glass possible with silicone sealing
  • Maximum door height: 2700 mm (8′ 10-5/16″)
  • Maximum door width: 1600 mm (5′ 3″)
  • For 2 bi-parting and bypassing sliding doors, order 2 sets
  • Smooth quiet operation
  • Maintenance-free
  • Glass mounted with well-tried clamping shoe technology
  • With integrated fixed glass profile for fixed glass solutions
  • Continuous bottom guide adjustment for different glass thicknesses
  • Rattle-free bottom guide
  • Adjustable stopper retaining force
  • Simple installation
  • No glass cut-outs required
  • Vertical adjustment without removing the glass door
  • Area of application: All-glass doors, private living areas, private and public office areas, projects, individual interior furnishing
  • Larger tracks are available for special order – please call 1.800.667.8721 to order
  • Note: When using 2 sliding doors on the same track, please make sure that glass panels do not collide. Please use a lower guide channel with a door stopper or use protective edge trim.
  • Set includes: 2x double roller running gear; 2x suspension bolt; 2x M8 set nut; 2x clamp shoe – adjustable from 6 – 12.7 mm (1/4″ – 1/2″); 1x track stopper, with adjustable retention spring; 1x track stopper; 1x floor guide – adjustable from 6 – 12.7 mm (1/4″ – 1/2″); 1x buffer
  • Support Profile for Fixed Glass, pre-drilled – 2.5 m (8′ 2-7/16″) length, 53mm W x 19mm D (2-3/32″ x 3/4″)
  • Fixed Glazing Profile/Lower Guide Channel, pre-drilled – 2.5 m (8′ 2-7/16″) length, 30mm W x 20mm D (1-3/16″ x 25/32″)
  • Fixing set for support profile and fixed glazing profile
  • End piece to fascia, one-sided, wall mounted – 64 mm (2-33/64″) or 70 mm (2-3/4″)
  • Sealing Profile for 8 and 10mm (5/16″ and 3/8″) Glass, Rubber, Black, 20 m (65′ 7-7/16″) length roll
  • Seal, Plastic, Black, 20 m (65′ 7-7/16″) length roll – for Clip-on Panel Fascia
  • Soft Closing Mechanism – for Door Weight 135-220lbs. (61-100kg )
  • Cover Cap – for Notched Service Access in Track
  • Drill Jig – for Notched Service Access in Track

Description:

This Sliding Door Hardware Porta 100 GF Fitting Set by Hafele is designed for one top running glass door weighing up to 220 lbs. (100kg). The glass door is held at the top by two glass clamp shoes that are connected to the running gear, and then the running equipment moves inside a running track that is also equipped with a fixed glass holder. The sliding door hardware system is suitable for wall or flush ceiling mounting. A clip-on panel, sold separately, made from aluminium (or your own wood piece) can be fitted to the track width for a finished look.

Dimensions:

(W = side to side) (D = front to back) (H = top to bottom)

Weight 1.68 lbs
Dimensions 7.87 × 4.72 × 2.36 cm
Brand