Hafele Porta 100 G Fitting Set, Sliding Door Hardware, Top Hung System, for 1 and 2 Sliding Glass Doors up to 220 lbs. each

SKU: HA-941.00.007



  • Porta 100 G Fitting Set – Sliding Door Hardware, Top Hung System
  • Complete Fitting Set, for a single sliding door without running track
  • Wall or ceiling mounting
  • Door Hardware System requires an upper track (See Required Upper Track)
  • For 1 and 2 sliding glass doors
  • For Glass Doors up to 220 lbs. (100kg) each
  • For glass thickness: 8 – 12.7 mm (5/16″ – 1/2″)
  • For 2 bi-parting and bypassing sliding doors, order 2 sets
  • Smooth quiet operation
  • Maintenance-free
  • Glass mounted with well-tried clamping shoe technology
  • Continuous height adjustment
  • Continuous bottom guide adjustment for different glass thicknesses
  • Rattle-free bottom guide
  • Adjustable stopper retaining force
  • Simple installation
  • No glass cut-outs required
  • Vertical adjustment without removing the glass door
  • Area of application: All-glass doors, private living areas, private and public office areas, projects, individual interior furnishing
  • Larger tracks are available for special order – please call 1.800.667.8721 to order
  • Note: When using 2 sliding doors on the same track, please make sure that glass panels do not collide. Please use a lower guide channel with a door stopper or use protective edge trim.
  • Set includes: 2x double roller running gear; 2x suspension bolt; 2x M8 set nut; 2x clamp shoe – adjustable from 6 – 12.7 mm (1/4″ – 1/2″); 1x track stopper, with adjustable retention spring; 1x track stopper; 1x floor guide – adjustable from 6 – 12.7 mm (1/4″ – 1/2″); 1x buffer
  • Panel Fascia End Piece Set, One-sided, Aluminum – Wall Mounted, 44.5mm; or Ceiling Mounted, 49mm
  • Clip Piece for Wood Panel Fascia, Aluminum – Mounted every 500 mm (19 11/16″)
  • Seal, Plastic, Black, 20 m (65′ 7-7/16″) length roll – for Clip-on Panel Fascia
  • Soft Closing Mechanism – for Door Weight 135-220lbs. (61-100kg )
  • Cover Cap – for Notched Service Access in Track
  • Drill Jig – for Notched Service Access in Track


This Sliding Door Hardware Porta 100 G Fitting Set by Hafele works by having the glass held at the top by two glass clamp shoes that are connected to the running gear. The running equipment of the hardware set moves inside a combination running track that is suitable for wall or ceiling mounting. A clip-on panel, sold separately, made from aluminium (or your own wood piece) can be fitted to the track width for a finished look.


(W = side to side) (D = front to back) (H = top to bottom)

Weight 1.68 lbs
Dimensions 7.87 × 4.72 × 2.36 cm