Hafele Aximat® 300 Thin Panel Institutional Heavy Duty Cabinet Hinge, Opening Angle: 240° With 3/8” or 1/2” Overlay





  • Hafele Aximat® 300 Thin Panel Institutional Hinge
  • Tested in Accordance with ANSI/BHMA Grade 1 Standards
  • Ideal for Schools, Healthcare & Laboratory, Retail Enviroments, Furniture, Offices, Lockers, Garage Storage Cabinets, etc.
  • For Overlay Doors
  • Heavy Duty
  • Material: Zinc
  • Finish: Matt Nickel
  • Maximum Door Opening Angle: 270°
  • Available Door Overlay: 3.5mm + Knuckle 6mm = 9.5mm (3/8”) or 7mm + Knuckle 6mm = 13mm (1/2”)
  • Specifically Designed for Thin Panels such as Phenolic Material
  • Sleek Sophisticated Design
  • Only 5mm (3/16”) of Knuckle is Visible
  • For Doors Up to 600mm (23-5/8”) Wide
  • 3D Adjustment
  • During Overlay (Side to Side) Adjustment, the Knuckle Moves with the Door Preventing a Gap Between Door?s Edge and Knuckle
  • During Overlay (Side to Side) Adjustment is on the Arm Component as Opposed to the Cup component; Offering Continuous Adjustment of +1 /-2mm in Both Directions
  • Depth Adjustment of ? 1mm is Achieved with Oblong Holes
  • Height Adjustment (Up and Down) of ? 2mm is on the Door Component
  • Safety Screw can be Pre-Installed at any time as it does not Effect the Adjustments
  • Integrated Catch Keeps Doors Closed, No Additional Magnetic Catches Required
  • Ideal for Commericial Use in Schools, Hosptials or Commercial Buildings
  • Special Non-Corroding Screws Included
  • Note When inserting screws into Phenolic material, they may corrode because of the material?s internal properties. Screw holes should be slightly tapered in Phenolic material to assure a tight fit.


The Aximat® 300 Thin Panel Institutional Cabinet Hinge by Hafele is specifically designed for thin panels such as Phenolic material. This institutional hinge has a sleek sophisticated design with only 5mm (3/16”) of knuckle is visible, made of Zinc and available in a Matt Nickel finish.


(W = side to side) (D = front to back) (H = top to bottom)

Weight N/A
Dimensions N/A

1/2'' Overlay Mounting, 3/8'' Overlay Mounting